Version 2.6.2
-- Streamlined install procedure; moved etc stuff into separate
   subdirectory.
-- First draft of Flash Translation Layer module, and FTL formatting
   tools (ftl_format, ftl_check).
-- Fixed bug in resource allocation that sometimes causes bad things
   to happen when unloading modules or when restarting cardmgr.
-- Updated Roger Pao's New Media ethernet driver to v0.14.
-- Changed pcmem_cs to use memcpy() for block reads and writes.
-- Changed de650_cs to use larger packet buffer on Socket EA cards.
-- Fixed cardmgr 'kill -HUP' behavior.
-- Updated some man pages.

Version 2.6.1
-- Changed 'checkme' and docs to ask for kernel 1.2.8.
-- Fixed bug in modules/Makefile
-- Fixed bug in module version mismatch reporting.
-- Fixed a couple of minor bugs in cardmgr.
-- Fixed uninitialized variable bug in CIS parsing stuff in network
   drivers.

Version 2.6.0
-- More robust handling of some i82365 timing parameters.
-- Moved all CIS handling stuff from cs.c to cistpl.c.  Added more CIS
   parsing, mainly for memory cards.  Changed default for "strict_cis"
   to "off".
-- Moved all the resource management stuff into rsrc_mgr.{c,h}, merged
   with the old mem_region.{c,h}.
-- Added cs_internal.h for stuff shared between parts of pcmcia_core.
-- Added support for Memory Technology Drivers.  Added new sram_mtd,
   also added generic MTD-aware memory card driver, 'memory_cs'.
-- Added MTD stuff to Programmer's Guide.
-- Fixed bug in CS that prevented clean unloading of drivers that use
   memory windows.
-- Changed i82365 module to detect Vadem chip in Vadem-Rev mode.
-- Added MTD's for Intel Series 2 and Series 2+ Flash.
-- Incorporated recent updates to Linux NE2000 driver into de650_cs
   driver.
-- Fixed bad uninitialized variable bug in pcmem_cs.
-- Added config entry for Adaptec APA-1460 SlimSCSI.

Version 2.5.6
-- Fixed rc.pcmcia so that "stop" doesn't bomb if you're not running
   cardinfo.
-- Added back a few modem config entries.
-- Added version checking to all PCMCIA modules and utilities.
-- Fixed bug in i82365 socket counting code.
-- Fixed 'checkme' and HOWTO to give better info about version.h,
   added more network checks, better formatting.
-- Clarified NE2000 instructions in HOWTO.
-- Added support for KCI PE-520 Ethernet.
-- Fixed bug in pcmem driver that could cause the first byte of a card
   to get scrambled.

Version 2.5.5
-- Added function-based card identification to cardmgr.  Deleted all
   modem card entries from standard config file.
-- Added 'strict_cis' parameter to pcmcia_core module to control
   strict CIS parsing rules (default is turned on).
-- Changed power-up sequence: reset will only be asserted after
   vcc_settle, reset timing tweaked to conform to standard.
-- Fixed bugs in suspend/resume losing track of socket state.
-- Added definitions for Ricoh controllers.

Version 2.5.4
-- Fix for CIS long link tuple handling.
-- Fixed CIS config table parsing bug in parse_irq().
-- Changed cardmgr so that wildcard product strings will match
   not-present strings.
-- A few new sanity checks for 'make prereq' and 'make install-etc'.

Version 2.5.3
-- Another fix to cistpl.c version string parsing.
-- Another fix to CIS end-of-chain handling.

Version 2.5.2
-- Changed cistpl.c to accept some non-conforming version tuples.
-- Duh, took floating point code out of kernel modules.

Version 2.5.1
-- Fixed bug in 'cardinfo' updating of device info.
-- Changed defaults in i82365 module to disable irqs 12 and 15 for
   Cirrus chips.  Also made interrupt scans more robust, and fixed
   probe for two controllers.
-- More module unloading bugs fixed (ethernet, scsi modules).
-- Fixed a couple of minor bugs in Makefiles, etc.
-- Added more extensive CIS parsing, improved dump_tuples, added long
   link handling.  Some error responses may have changed.
-- Changed 'attr_speed' parameter to 'cis_speed', since code now also
   handles CIS stuff in common memory.  Default changed to 300 ns.
-- Added text to the Programmer's Guide describing new CIS stuff.
-- Fixed suspend/resume problem where an empty socket isn't set up
   properly after a resume.
-- Fixed race condition in socket initialization that could sometimes
   cause a card to be configured twice.

Version 2.5.0
-- Verified with Linux 1.2.0
-- Added a lot of new text to the Programmer's Guide.
-- Added Roger Pao's alpha driver for New Media Ethernet.
-- Added %c% substitution for 'cardmgr' start/stop commands, to map to
   the card name.
-- Rewrote Driver Services event handling to deal with more than one
   reader.  Rewrote handing of eject requests so that cardmgr can
   clean up before a card is shut down.
-- Added event report window to 'cardinfo' display.  Made 'cardinfo' a
   setuid program so that regular users can run it to get status info,
   but not modify sockets.  Added file locking to /etc/stab.
-- Changed socket initialization sequence to conform to PCMCIA docs;
   should fix Megahertz 2144 modem and some suspend/resume problems.
-- Changed interrupt mask code in i82365 and tcic to probe for working
   interrupt lines at startup time.  Added ability for tcic driver to
   use irq 11.
-- Fixed 'checkme' to do more SCSI option sanity checking, and to look
   in $LINUX/include/linux instead of /usr/include/linux.
-- Fixed module unloading bugs in toaster_cs and qlogic_cs.
-- Fixed bug in /etc/stab updating at card removal.
-- Fixed Vpp display bug in cardinfo.
-- Fixed power setting bug in GetSocket in i82365.
-- Fixed serial_cs shutdown bug for case of two modems.

Version 2.4.9
-- Minor fixes to HOWTO, Programmer's Guide.
-- Included missing man pages for cardinfo, stab.

Version 2.4.8
-- Added Maxtech Ethernet support.  Added text to HOWTO for how to add
   support for any NE2000-compatible card.
-- Fixed serial driver suspend bug, but it is still goofy.
-- Added status beeps to cardmgr.
-- Fixed Makefiles to include ${LINUX}/include, to better support
   systems with more than one Linux source tree.
-- Made 'cardinfo' tool part of distribution.
-- New man pages for /etc/stab, cardinfo.

Version 2.4.7
-- Changed cardmgr to use uname() instead of /bin/uname.
-- Moved cardmgr PID file from /var/pid to /var/run.
-- Changed 'checkme' script to also work with ksh.
-- Overhaul of suspend/resume and reset event handling.  Goal is to
   fix trouble with cards not waking up after resume.
-- Added some more tests to 'checkme'; now it creates 'xtra.options'
   to hold extra Makefile settings.
-- Changed Makefile to autoconfigure rc.pcmcia using 'probe -m'.
-- Added '/etc/stab' file output to cardmgr to hold current card info.
-- Added more interlocks to shutdown code in de650_cs.
-- Updated Qlogic driver for 1.1.93, for rev 1.10 card.

Version 2.4.6
-- More fixes for Socket EA card, that should also fix Accton file
   transfer problems.  Added 'delay_time' parameter to de650_cs.
-- Fixed reset code for Compaq modem.  New 'reset_time' parameter for
   pcmcia_core module.  Changed default reset timing parameters.

Version 2.4.5
-- Added support for EP-210 Ethernet
-- Fixed Socket EA card, for real!

Version 2.4.4
-- Changed Bus Toaster driver to use CIS tuples to pick IO addresses.
-- Added 'wakeup' parameter to i82365 module for sleepy Cirrus chips.
-- Fixed minor Makefile bugs.
-- Fixed bugs in de650_cs for Socket EA card.
-- Added 'mem_speed' parameter to ibmcc_cs module.

Version 2.4.3
-- Fixed bug in PCI controller handling in i82365 module.
-- Changed qlogic module to support turbo DMA.
-- Increased tuple buffer in serial_cs for Toshiba V.34 modem.
-- Added 'eject' and 'insert' commands to cardctl.
-- Disabled Bus Toaster driver by default, since it is broken.
-- Changed rc.sample to rc.pcmcia, added 'start' and 'stop'.
-- Fixed interlocks between socket drivers and pcmcia_core.

Version 2.4.2
-- Fixed several bugs in Qlogic, Bus Toaster SCSI drivers.

Version 2.4.1
-- Fixed bug in TCIC-2 bus sizing code.

Version 2.4.0
-- Changed default spot for cardmgr pid file to /var/pid/cardmgr.pid
   to conform to Linux standards.
-- Converted FAQ to linuxdoc-sgml HOWTO format.
-- More fixes for reset handling in cardmgr.
-- 'cardctl status' will now report if a socket is suspended.
-- When cardmgr gets a SIGHUP, it will reload the config file.
-- Changed i82365 driver to handle multiple controllers better.
-- Replaced old 'exclude=' options in i82365 and tcic with new
   'ignore=' option to specifically ignore any one socket.  The old
   option ignored sockets starting from 0.
-- Cleaned up resource management stuff in cardmgr, so that SIGHUP
   will work properly, and no more "could not adjust resource" stuff.
-- Fixed some device locking bugs in the memory card driver.
-- Fixed small memory leak in CS resource handling.
-- Wrote Programmer's Guide.
-- Small fixes in cs.c and 3c589 driver for very fast systems.
-- Added 'checkme' script and 'make prereq' target to check system for
   PCMCIA prerequisites.
-- Fixed up module handling in cardmgr for dealing with several cards
   of the same type.
-- Got rid of CONFIG_APM and CONFIG_PCI options -- they will be set
   automatically using /usr/include/linux/autoconf.h.
-- Updated for 1.1.85 kernel.
-- Fixed up Qlogic, Bus Toaster SCSI drivers.
-- Kernel modules now installed under /lib/modules/<rev>/pcmcia.
   Updated cardmgr to use the new module location.
-- Changed cardmgr to bind anonymous card driver to unsupported cards
   whenever possible.
-- Added more timing controls to i82365 and tcic modules.  Implemented
   AccessSpeed for memory windows.  Added attr_speed and io_speed
   parameters to pcmcia_core module.
-- Added IO window attribute IO_DATA_WIDTH_AUTO for auto-sizing IO
   windows.

Version 2.3.9
-- Changed default compile options for modules to include "-g".
-- Added 'reset' command to cardctl.  Made cardmgr more sensible about
   dealing with failed resets.
-- Added device locking to pcmem_cs driver for "clean" suspend/resume.
-- Cleaned up network driver shutdown code -- fixed "device still
   locked" message when drivers are unloaded.
-- Fixed memory card size determination algorithm so that it doesn't
   return garbage for I/O cards.
-- Cleaning up spurious interrupts when net cards are ejected: a new
   patch for 8390.c.

Version 2.3.8
-- Fixed bug in 3c589_cs.c that prevented clean unloading.
-- Fixed 3c589_cs.c to work with 3c589B cards.

Version 2.3.7
-- Fixed bad bug in tcic.c.

Version 2.3.6
-- Fixed 'exclude' bug in i82365
-- Update for Linux 1.1.72.
-- Replaced 'status' with new 'cardctl' utility.  Added options for
   suspending and resuming individual sockets.
-- Added RPTI ethernet support.
-- Added stuff to i82365 and tcic modules to fix interrupt selection.
   Also added flags for Cirrus controllers with optional features like
   status LED's, ring indicate, and DMA.

Version 2.3.5
-- Fixed ifconfig problem in 3c589 driver.
-- Fixed up PCI support some more.
-- Fixed i82365 to handle VLSI with > 1 socket
-- Changes for APM support.  These include revamping the socket setup
   stuff in i82365 and tcic, and adding event handling to all clients.
-- Changes for Qlogic SCSI support

Version 2.3.4
-- Added support for Cirrus PCI controller.
-- Cleaned up serial driver shutdown code.
-- Added 'patches' subdirectory for useful kernel patches.
-- Added PCMCIA-FAQ
-- Added 'exclude=#' parameter to i82365 and tcic modules to better
   accommodate cards with point enablers.
-- Fixed bug in dump_tcic -- mode register wasn't read correctly.
-- Fixed TCIC-2 event handler problem

Version 2.3.3
-- Fixed some TCIC-2 bugs.

Version 2.3.2
-- Changed i82365 so if it is limited with a 'sockets=#' option, it
   will never touch any higher numbered socket -- for SCSI drivers
   with point enablers.
-- More debugging code in i82365, tcic modules.
-- Added stuff to 'cardmgr' to maintain a /etc/pcmcia/cardmgr.pid file.
-- Fixed blocksize problem, module unloading bug in pcmem_cs driver.
-- Fixed bug in cardmgr 'kill -HUP' handling (actually in Card Services)

Version 2.3.1
-- Fixed TCIC-2 polling bug.

Version 2.3
-- Major rewrite of low-level i82365 and tcic driver interface.  Card
   status polling put in the low level drivers instead of pcmcia_core.
-- Rewrite of low-level card status event handling.
-- Better TCIC-2 register dump utility.
-- DMA and speaker output control for TCIC-2, Cirrus controllers.
-- Added signal handling to cardmgr
-- Checked with 1.1.61 kernel.

Version 2.2.10
-- Small fix in Vadem probe code.
-- Fix for New Media hardware address probe.
-- Cleaned up memory window handling in Card Services.
-- Added a heavily-commented "skeleton" client driver

Version 2.2.9
-- One more VLSI controller fix.
-- Accton and New Media ethernet support merged into de650 driver.

Version 2.2.8
-- Fixed handling of second socket with VLSI controller.
-- Fixed event handling bug in ibmcc and pcmem drivers.

Version 2.2.7
-- Added TCIC_SCF2_IDBR fix to tcic.c.
-- Fixed bug in 3c589 interrupt handler.

Version 2.2.6
-- Changed distribution to include lex and yacc output files.
-- Added support for Vadem VG-468 controller.
-- Changed i82365 code to support suspend/resume (sometimes, anyway).
-- Fixes in TCIC-2 autodetect and event handling.
-- Updated 3c589_cs driver to parallel changes to 3c509 driver.
-- Changed all client drivers so they can be manually unloaded as long
   as their devices are not in use.
-- Working on Accton EN2212 driver.
-- Checked with 1.1.54 kernel.

Version 2.2.5
-- Fixed event mask bug in ibmcc_cs, socket numbering bug in i82365.

Version 2.2.4
-- Changed cardmgr to handle modules that take parameters.
-- Minor cleanups of Makefiles.
-- Better error handling for all Card Services stuff.
-- Minor improvements in debug tools.
-- Small fix in 3c589_cs driver.
-- Checked with 1.1.51 kernel.

Version 2.2.3
-- Added 'expert' flag (-x) to probe -- this does a somewhat risky but
   thorough search for a TCIC-2 chip.  But, it doesn't work yet.
-- Fixed bug in CS that prevented clean unloading of modules.
-- Fixed 'kmalloc called nonatomically' bug in ibmcc_cs.
-- Added extra test to i82365 to fix socket counting for some clones.
-- Added write protect test to memory card driver.
-- Man pages for cardmgr, config file, and drivers!
-- Changed default config script to automatically link /dev/modem to
   a modem or serial card.

Version 2.2.2
-- Added 'anonymous' card type to cardmgr, so that cards with no CIS
   information can be bound to the memory card driver.

Version 2.2.1
-- Checked with 1.1.49.
-- Minor install bug fixes.

Version 2.2
-- Cleaned up README's

Version 2.1.4
-- Added 'poll_delay' parameter to tcic module to control busy loop.
-- Checked against 1.1.48.
-- Fixed the shared-memory IBM CCAE driver.
-- Removed (broken) IBM CCAE support from DE650 driver.
-- Better Cirrus PD67xx register dumping in dump_i365
-- Minor improvements to trim down module sizes

Version 2.1.3
-- Added preliminary shared memory driver for IBM CCAE cards.

Version 2.1.2
-- Added setup of "misc" register for IBM CCAE cards.
-- Cleaned up header files.
-- Fixed pcmem_cs for 1.1.47.

Version 2.1.1
-- Fixed network setup bug in config.sample.

Version 2.1
-- Checked against 1.1.46
-- Added memory card driver, pcmem_cs, providing character and block
   devices for accessing PCMCIA card memory.
-- Moved cardmgr from /usr/sbin to /sbin.
-- Added 'sockets' parameter to i82365 for systems where the probe
   does not give the right answer.
-- Added support for memory windows to CS.
-- Working on support for IBM CCAE in de650_cs.c.
-- Changed ds.c to relay major and minor device #'s as well as device
   names; now cardmgr can create device files on the fly.
-- Changed tcic driver to support alternate base addresses for the
   TCIC-2 chip, via an 'insmod' parameter setting.
-- Moved all configuration options to 'make.options', cleaned up the
   Makefiles, so that builds will be warning-free.
-- Updated modules for 1.1.44.
-- Cleaned up event handling in CS to make insert/removal detection
   more robust -- seems to help with MHz XJ2144.
-- Fixed bug in cardmgr temporary device file unlinking that was
   causing /tmp to fill up with bogus device files.
-- Fixed cardmgr to log messages on the console when syslogd is not
   running.
-- No patches needed for 1.1.43 kernel!
-- Added some hooks to CS so that it can be tweaked when you load it.
-- Added sti()'s to all the CS interrupt routines, added more timeouts
   to hopefully lower chance of deadlocks.

Version 2.0
-- Updated patches for 1.1.42 kernel.
-- Major file reorganization: now all the pcmcia stuff is segregated
   in one directory tree.
-- Changed device code in ds.c to grab the first free character
   device number.  Also changed cardmgr to read /proc/devices to
   determine what device number was found.  This eliminates the
   need for a kernel patch to include/linux/major.h.
-- Moved the "improved" resource registrar code out of ioport.c and
   into drivers/pcmcia, since it seems unlikely to be adopted any time
   soon.  
-- Changed DE650 driver so that it will pick I/O ports aligned to a 32
   port boundary between 0x300 and 0x400, since odd boundaries don't
   work.
-- Fixed IBM modem test in serial driver so it won't bail on modems
   with incomplete CIS's.
-- Working on simplifying configuration of 3c589 driver.  Now you can
   set if_port from insmod: "insmod 3c589_cs.o if_port=#".  This still
   isn't useful, because cardmgr doesn't allow arguments for modules.

Version 1.7
-- Changed serial driver to actually use the ports specified in the
   CIS.  This fixes Intel modems (and others??).
-- Support for 3Com 3c589 ethernet!
-- Support for IBM high-speed modems.

Version 1.6
-- Updated patches for kernel level 1.1.38.
-- Fixed serial driver to enable audio output.
-- Added GetStatus call to Card Services, added to 'status' reports.
-- Added 'probe' program to report PCMCIA controller type.
-- Added 'dump_i365' program to dump Intel and Cirrus registers.
-- Added 'dump_tcic' program to dump TCIC-2 registers.
-- Added -DPOLL_STATUS option to cs.c, to support explicit polling of
   card status changes on systems where card insertion/removal irq's
   don't seem to work.
-- Added 'dump_cisreg' program to dump CIS registers.
-- Better card status change handling with TCIC-2 controller.

Version 1.5
-- Attempt to fix card insertion/removal detection for TCIC-2.
-- Installation bug fixes.
-- Added 'tuples' program to dump CIS data.

Version 1.4
-- Updated patches for kernel level 1.1.35.
-- Fixed cardmgr to look in /sbin for the module utilities.

Version 1.3
-- Alpha support for TCIC-2 controller.

Version 1.1
-- Included missing cisreg.h header file.

Version 1.0
-- First release.