ELFp%4( D$<t <uÉÉÉUWVSl$f|$11ۍvÊ(PhfFff~h[^_]UWVSl$f|$11ۍvÊ(PhfFff~h[^_]Ã,UWVSD$8D$4D$0D$,D$$fD$ D$ f,EJfEJfjVt*jVD$H0hD$8D$8 X-\TPhPsF0tvVDBtRB%PuhjX-\TPhPfBfFTdžF4PVDBB%P%PuhVDBtB%Puh mvB%PB %PB %PB %PB %PB%PB%PB%PB%PB%Puh0EFD%Puh Fƀ+ߋFƀ)ߊD$tqFPЃ t/ t( vtFP%Puh VPBF`7vB%Puh FH%Puh  Fƀ)FƀKEFƀH@[^_]ÉU&[^_]Ívuh,[^_]VSt$ ^DCƀ(fSVft0C/{<uCS8C8 Cmmio=%08X, segment=%02X. %s: Shared RAM for this adapter (%05x) exceeds driver limit (%05x), adapter not started. IBM TR%s: Could not grab irq %d. Halting Token Ring driver. ibmtr%s%s: %s %s found using irq %d, PIOaddr %4hx, %dK shared RAM. %s: Hardware address : %02X:%02X:%02X:%02X:%02X:%02X %s: close adapter failed: %02X %s: Adapter check interrupt %s: 8 reason bytes follow: %02X %s: adapter error: ISRP_EVEN : %02x %s: error on xmit_dir_frame request: %02X %s: error on xmit_ui_frame request: %02X %s: open failed: Adapter speed must match ring speed if Automatic Ring Speed Save is disabled %s: retrying open to adjust to ring speed %s: No signal detected for Auto Speed Detection %s: Unrecoverable error: error code = %04x %s: Adapter initialized and opened. %s: open failed: ret_code = %02X, retrying %s: open_sap failed: ret_code = %02X,retrying %s: error on %02X: %02X %s: error on dir_read_log: %02X %s: Line errors %02X, Internal errors %02X, Burst errors %02X A/C errors %02X, Abort delimiters %02X, Lost frames %02X Receive congestion count %02X, Frame copied errors %02X Frequency errors %02X, Token errors %02X %s: Unknown command %02X encountered %s: unknown command in asb %02X %s: ASB error %02X in cmd %02X %s: DLC_STATUS new status: %02X on station %02X %s: Signal loss/Lobe fault %s: We try to reopen the adapter. %s: New ring status: %02X %s: Unknown command %02X in arb %s: xmit ret_code: %02X xmit error code: %02X %s: xmit xid ret_code: %02X %s: Unknown command %02X in ssb %s: Unexpected interrupt from tr adapter %s: Initial interrupt : shared RAM located at %08X. %s: ASB not free !!! %s: out of memory. frame dropped. %s: Arrg. Transmitter busy for more than 50 msec. Donald resets adapter, but resetting the IBM tokenring adapter takes a long time. It might not even help when the ring is very busy, so we just wait a little longer and hope for the best. %s: Transmitter access conflict tr0ibmtr: You should not use auto-probing with insmod! ibmtr: No adapters were found. GCC: (GNU) 2.7.2.3.symtab.strtab.shstrtab.text.rel.text.data.rel.data.bss.note.rodata.comment4(! \. +\h1 58 ;@F- N%%WP'@ ! +  ,$8JEPN$HXlHddnhiimxhfX 0L4s |`d&5< A"MH_|pw(FH $S(0&.8BPVdmvd<ibmtr.cgcc2_compiled.versionpcchannelidmcchannelidTokBaseAddrstr_timerPrtChanIDHWPrtChanIDbadti.344Shared_Ram_Base.345ram_bndry_mask.346tok_init_cardsize_code.349tok_opentok_closetok_send_packettok_get_statsopen_saptr_rxtr_txinitial_tok_intdevicenamedev_ibmtriodevicekernel_versionchannel_defadapter_defibmtr_debug_tracetok_open_adapterprintktok_probecheck_regionkmallocget_sram_sizetok_interruptrequest_irqirq2dev_maprequest_regiontrdev_inittr_setupsleep_onmod_use_count_dev_kfree_skbtr_readlogwake_upjiffiesadd_timerbh_activedev_alloc_skbpanictr_type_transnetif_rxdev_tintinit_moduleregister_netdevcleanup_moduleunregister_netdevfree_irqrelease_region CH&[`&&&($).&$&P$fk&v{&&&$&)<$&$&&&',&2AG_f+,&-.&."9>&&8BLV]m0122 1% * &3 29 2V -  &  &  &  &6 ; &                         # ( &: 3  & 5 / 4 &H X ] &  & 6      7  & 6  # - 6 ; 7_ 5  &  &&+&KP&&&HM&}&&67&#(&&&& %&&66).&38&9&:\;o<6&=3&6hr~&?&AB- C<@D`%|'