#!/bin/bash shopt -s extglob # x11.SlackBuild # Heavily based on the original Slackware build scripts, # Modified by Stuart Winter ################################################################################ # # Copyright 2007 Patrick Volkerding, Sebeka, MN, USA # All rights reserved. # # Redistribution and use of this script, with or without modification, is # permitted provided that the following conditions are met: # # 1. Redistributions of this script must retain the above copyright # notice, this list of conditions and the following disclaimer. # # THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED # WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO # EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, # PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; # OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, # WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR # OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # # To build only a single package group, specify it as $1, like: # ./x11.SlackBuild lib # To build only a single package, specify both the source directory # and the name of the package, like: # ./x11.SlackBuild lib libX11 ################################################################################ # Note: This build script (unlike x11.SlackBuild on x86) always upgrades and # installs (or reinstalls) the packages that it has just created. This # is because this is the easiest way I've found to build and maintain X # since the ARM port began. There is no choice since I haven't merged # the choice logic from x86 into this version of the script. # You're expected to run this script on a disposable build server. ################################################################################ echo "Command line: $@" # Record toolchain & other info for the build log: slackbuildinfo # Paths to skeleton port's source & real Slackware source tree: export CWD=$SLACKSOURCE/$PKGSERIES/$PKGNAM export PORTCWD=$PWD # Temporary build locations: export TMPBUILD=$TMP/build-$PKGNAM export PKG=$TMP/package-$PKGNAM mkpkgdirs # Delete & re-create temporary directories then cd into $TMPBUILD SLACK_X_BUILD_DIR=$TMPBUILD # Create a location to store build failure stamps: mkdir -vpm755 $PORTCWD/build-logs/$SLKPORTARCH/fails # Functions: pkgbase() { PKGEXT=$(echo $1 | rev | cut -f 1 -d . | rev) case $PKGEXT in 'gz' ) PKGRETURN=$(basename $1 .tar.gz) ;; 'bz2' ) PKGRETURN=$(basename $1 .tar.bz2) ;; 'lzma' ) PKGRETURN=$(basename $1 .tar.lzma) ;; 'xz' ) PKGRETURN=$(basename $1 .tar.xz) ;; *) PKGRETURN=$(basename $1) ;; esac echo $PKGRETURN } no_usr_share_doc() { # If there are docs, move them: if [ -d usr/share/doc ]; then mkdir -pm755 usr/doc mv -vf usr/share/doc/* usr/doc rmdir usr/share/doc fi } # Function to retrieve the package name. # glibc-solibs-2.2-i386-1.t?z = glibc-solibs function short_package_name () { local PACKAGENAME="$( echo $1 | rev | cut -d- -f4- | rev )" echo ${PACKAGENAME} } # Better have some binaries installed first, as this may not be # in the "magic order". I built mine by hand through trial-and-error # before getting this script to work. It wasn't that hard... I think. ;-) ( cd $CWD/src for x_source_dir in proto data util xcb lib app doc xserver driver font ; do # See if $1 is a source directory like "lib": if [ ! -z "$1" ]; then if [ ! "$1" = "${x_source_dir}" ]; then continue fi fi PKG=${SLACK_X_BUILD_DIR}/package-${x_source_dir} rm -rf $PKG mkdir -p $PKG ( cd $x_source_dir for x_pkg in *.tar.?z* ; do # Reset $PKGARCH to its initial value: PKGARCH=$ARCH PKGNAME=$(echo $x_pkg | rev | cut -f 2- -d - | rev) # Perhaps $PKGARCH should be something different: if grep -wq "^$PKGNAME" ${CWD}/noarch ; then PKGARCH=noarch fi if grep -wq "^$PKGNAME" ${CWD}/package-blacklist ; then continue fi cd $SLACK_X_BUILD_DIR # If $2 is set, we only want to build one package: if [ ! -z "$2" ]; then if [ "$2" = "$PKGNAME" ]; then # Set $PKG to a private dir for the modular package build: PKG=$SLACK_X_BUILD_DIR/package-$PKGNAME rm -rf $PKG mkdir -p $PKG else continue fi else echo echo "Building from source ${x_pkg}" echo fi if grep -wq "^$PKGNAME" ${CWD}/modularize ; then # Set $PKG to a private dir for the modular package build: PKG=$SLACK_X_BUILD_DIR/package-$PKGNAME rm -rf $PKG mkdir -p $PKG fi # Clean out any previous build failure stamp for this package: rm -f $PORTCWD/build-logs/$SLKPORTARCH/fails/${PKGNAME} # Now, if there's a local Slackware ARM version (which may be an alternate # version if the one in Slackware won't build), let's find it: # (this is very rare - which is why the logic of this bit of # code is awful; a real hack). if [ -f $PORTCWD/src/${x_source_dir}/${PKGNAME}-*.t*z ]; then echo "******************************************************" echo "*** Found local copy $PORTCWD/src/${x_source_dir}/${PKGNAME}*.t?z ****" echo "******************************************************" x_pkg=$( basename $PORTCWD/src/${x_source_dir}/${PKGNAME}-*.t*z ) LOCATIONCWD=$PORTCWD else LOCATIONCWD=$CWD fi # Let's figure out the version number on the modular package: MODULAR_PACKAGE_VERSION=$(echo $x_pkg | rev | cut -f 3- -d . | cut -f 1 -d - | rev) rm -rf $(pkgbase $x_pkg) # tar xvvf $CWD/src/${x_source_dir}/${x_pkg} || exit 1 tar xvvf $LOCATIONCWD/src/${x_source_dir}/${x_pkg} || exit 1 cd $(pkgbase $x_pkg) || exit 1 slackhousekeeping # Refresh libtool to support latest architectures: slackupdatelibtool echo "*** Modular package version: $MODULAR_PACKAGE_VERSION ***" # If any patches are needed, call this script to apply them: if [ -r $CWD/patch/${PKGNAME}.patch ]; then . $CWD/patch/${PKGNAME}.patch fi # And then any local Slackware ARM patches: if [ -r $PORTCWD/patch/${PKGNAME}.patch ]; then . $PORTCWD/patch/${PKGNAME}.patch fi # Set the compile options for the $ARCH being used: PKGARCH=$ARCH # ARCH is set from arm/build . $PORTCWD/arch.use.flags # ./configure, using custom configure script if needed: # autoreconf # Check if we have a $PKG specific Slackware ARM configure script first: if [ -r $PORTCWD/configure/${PKGNAME} ]; then echo "*************************************************************************" echo "*** Using local package specific configure: $PORTCWD/configure/${PKGNAME}" echo "*************************************************************************" . $PORTCWD/configure/${PKGNAME} # No, perhaps a Slackware x86 one? elif [ -r $CWD/configure/${PKGNAME} ]; then echo "*****************************************************************************" echo "*** Using master source package specific configure: $CWD/configure/${PKGNAME}" echo "*****************************************************************************" # . $CWD/configure/${PKGNAME} # We need to add "gnueabihf" otherwise building doesn't # work for the EABI ARM port: sed -e 's?$ARCH-slackware-linux?${SLK_ARCH_HOST}?g' $CWD/configure/${PKGNAME} > armconfigure # No autoconf "configure" script shipped by the vendor? try and make one. [ ! -x ./configure ] && autoreconf -vif . armconfigure else echo "*******************************************************************" echo "*** Using master source default configure: $CWD/configure/${PKGNAME}" echo "*******************************************************************" # This is the default configure script: # . $CWD/configure/configure sed -e 's?$ARCH-slackware-linux?${SLK_ARCH_HOST}?g' $CWD/configure/configure > armconfigure # No autoconf "configure" script shipped by the vendor? try and make one. [ ! -x ./configure ] && autoreconf -vif . armconfigure fi # Run any pre-configure scripts - for example, to patch -Werror to -Wall. # We can't put sed commands within the "patch" script because if autoconf needs to run, # it'll create a new Makefile. if [ -r $PORTCWD/pre-configure/${PKGNAME}.pre-configure ]; then echo "*** Sourcing local pre-configure script" . $PORTCWD/pre-configure/${PKGNAME}.pre-configure fi # Run make, using custom make script if needed: # Check if we have a $PKG specific Slackware ARM make file first: if [ -r $PORTCWD/make/${PKGNAME} ]; then . $PORTCWD/make/${PKGNAME} # No, perhaps a Slackware x86 one? elif [ -r $CWD/make/${PKGNAME} ]; then . $CWD/make/${PKGNAME} else # This is the default make && make install routine: # I had make -j1 here for xorg 7.2 but I don't know why - whether # anything more broke on ARM... let's see! if ! make $NUMJOBS ; then echo "******* $PKGNAME FAILED MAKE *******" touch $PORTCWD/build-logs/$SLKPORTARCH/fails/${PKGNAME} continue fi fi # Install into package: make install DESTDIR=$PKG if [ ! -z "$MODULAR_PACKAGE_VERSION" ]; then mkdir -p $PKG/usr/doc/${PKGNAME}-${MODULAR_PACKAGE_VERSION} else # Use the main X11 version number: mkdir -p $PKG/usr/doc/${PKGNAME}-${VERSION} fi cp -favv \ AUTHORS* COPYING* INSTALL* README* NEWS* TODO* \ $PKG/usr/doc/${PKGNAME}-*/ # Trim down a "ChangeLog" file: if [ ! -z "$MODULAR_PACKAGE_VERSION" ]; then changelogliposuction ChangeLog $PKGNAME $MODULAR_PACKAGE_VERSION else changelogliposuction ChangeLog $PKGNAME $VERSION fi # Get rid of zero-length junk files: ( cd $PKG/usr/doc find . -type f -size 0 -exec rm --verbose "{}" \; rmdir --verbose * ) # Strip binaries: ( cd $PKG find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null find . | xargs file | grep "current ar archive" | grep ELF | cut -f 1 -d : | xargs strip -g 2> /dev/null ) # If there's any special post-install things to do, do them: if [ -r $CWD/post-install/${PKGNAME}.post-install ]; then RUNSCRIPT=$(mktemp -p $TMP) || exit 1 cat $CWD/post-install/${PKGNAME}.post-install | sed -e "s#usr/lib#usr/lib${LIBDIRSUFFIX}#g" > $RUNSCRIPT . $RUNSCRIPT rm -f $RUNSCRIPT fi # If there are Slackware ARM specific post-install things, do them: if [ -r $PORTCWD/post-install/${PKGNAME}.post-install ]; then . $PORTCWD/post-install/${PKGNAME}.post-install fi # If this package requires some doinst.sh material, add it here: if [ -r $CWD/doinst.sh/${PKGNAME} ]; then mkdir -p $PKG/install cat $CWD/doinst.sh/${PKGNAME} >> $PKG/install/doinst.sh fi # If this is a modular package, build it here: if [ -d $SLACK_X_BUILD_DIR/package-$PKGNAME ]; then cd $PKG slackgzpages -i # compress man & info pages and delete usr/info/dir slack_delete_lafiles # delete usr/lib{,64}/*.la slackslack # chown -R root:root, chmod -R og-w, slackchown, slack644docs no_usr_share_doc mkdir -p $PKG/install if [ -r $CWD/slack-desc/${PKGNAME} ]; then cat $CWD/slack-desc/${PKGNAME} > $PKG/install/slack-desc else touch $PKG/install/slack-desc-missing fi # Figure out the build number for this package: # Let's check if it's a local ARM package: if [ -s $PORTCWD/build-nums/localpkgs/${PKGNAME} ]; then source $PORTCWD/build-nums/localpkgs/${PKGNAME} elif [ -s $PORTCWD/build-nums/upstreampkgs/${PKGNAME} ]; then source $PORTCWD/build-nums/upstreampkgs/${PKGNAME} else # We could write out a setting, but we don't know if it's an # upstream or local package, so we'll use the version set in the # "arm/build" script and let the Sud version helper fix it up # next time. This situation shouldn't happen so there's no need to # be clever here. echo "WARNING: Didn't find any stored package build settings - build=$BUILD" MODBUILD=$BUILD # inherited from arm/build script fi # Figure out how to 'makepkg' the package: if [ -r $CWD/makepkg/${PKGNAME} ]; then echo "**** Executing custom makepkg $CWD/makepkg/$PKGNAME ****" BUILD=$MODBUILD . $CWD/makepkg/${PKGNAME} # Install & upgrade the new packages just built (the makepkg script may also do this, # but we always did this on ARM. If it's re-re-installed, that's ok). upgradepkg --reinstall --install-new ${SLACK_X_BUILD_DIR}/*.t?z # Delete the previous versions from the Slackware ARM tree: ( cd ${SLACK_X_BUILD_DIR} for i in *-[0-9]*.t?z ; do # Wipe old packages from the Slackware tree - this caters for packages who share # the same first name - eg xcb-util, xcb-util-foo ( PKGNAM=$( short_package_name $i ) /usr/share/slackdev/slackwipepkg ) done ) # Move the new packages into the Slackware ARM tree: ( cd ${SLACK_X_BUILD_DIR} mv -fv *.t?z $PKGSTORE/x/ ) else echo "*** Did not find a modular package-specific makepkg; using defaults.. ***" makepkg -l y -c n ${SLACK_X_BUILD_DIR}/${PKGNAME}-${MODULAR_PACKAGE_VERSION}-${PKGARCH}-${MODBUILD}.txz # Install & upgrade the new packages just built: upgradepkg --reinstall --install-new ${SLACK_X_BUILD_DIR}/*.t?z # Delete the previous versions from the Slackware ARM tree: ( cd ${SLACK_X_BUILD_DIR} for i in *-[0-9]*.t?z ; do # Wipe old packages from the Slackware tree - this caters for packages who share # the same first name - eg xcb-util, xcb-util-foo ( PKGNAM=$( short_package_name $i ) /usr/share/slackdev/slackwipepkg ) done ) # Move the new packages into the Slackware ARM tree: ( cd ${SLACK_X_BUILD_DIR} mv -fv *.t?z $PKGSTORE/x/ ) fi # "fi" from "if [ -r $CWD/makepkg/${PKGNAME} ]..." fi # "fi" from "if [ -d $SLACK_X_BUILD_DIR/package-$PKGNAME ]; then" # Reset $PKG to assume we're building the whole source dir: PKG=${SLACK_X_BUILD_DIR}/package-${x_source_dir} done # If we have anything here in /etc or /usr, then the build was not fully # modular and we should package up whatever's there as an x11- # package: if [ -d ${SLACK_X_BUILD_DIR}/package-${x_source_dir}/etc -o -d ${SLACK_X_BUILD_DIR}/package-${x_source_dir}/usr ]; then # Build an "x11-" package for anything that wasn't built modular: # It's safer to consider these to have binaries in them. ;-) PKGARCH=$ARCH cd $PKG slackgzpages -i # compress man & info pages and delete usr/info/dir slack_delete_lafiles # delete usr/lib{,64}/*.la slackslack # chown -R root:root, chmod -R og-w, slackchown, slack644docs no_usr_share_doc # If there are post-install things to do for the combined package, # we do them here. This could be used for things like making a # VERSION number for a combined package. :-) if [ -r $CWD/post-install/x11-${x_source_dir}.post-install ]; then RUNSCRIPT=$(mktemp -p $TMP) || exit 1 cat $CWD/post-install/x11-${x_source_dir}.post-install | sed -e "s#usr/lib#usr/lib${LIBDIRSUFFIX}#g" > $RUNSCRIPT . $RUNSCRIPT rm -f $RUNSCRIPT fi mkdir -p $PKG/install if [ -r $CWD/slack-desc/x11-${x_source_dir} ]; then cat $CWD/slack-desc/x11-${x_source_dir} > $PKG/install/slack-desc else touch $PKG/install/slack-desc-missing fi if [ -r $CWD/doinst.sh/x11-${x_source_dir} ]; then cat $CWD/doinst.sh/x11-${x_source_dir} | sed -e "s#usr/lib#usr/lib${LIBDIRSUFFIX}#g" >> $PKG/install/doinst.sh fi # We only care about the build numbers in the local Slackware ARM tree # since the port is maintained independently: #if [ -r $CWD/build/x11-${PKGNAME} ]; then # SRCDIRBUILD=$(cat $CWD/build/x11-${PKGNAME}) # Note: we don't check for local package version details here because # the Slackware ARM port doesn't maintain any of these packages - they're # all modules that are handled by the build code above. if [ -r $PORTCWD/build-nums/upstreampkgs/x11-${PKGNAME} ]; then source $PORTCWD/build-nums/upstreampkgs/x11-${PKGNAME} SRCDIRBUILD=$MODBUILD # this isn't really the 'modular' build number but we'll use the same variable name. # SRCDIRBUILD=$(cat $CWD/build-nums/$SLKPORTARCH/x11-${PKGNAME}) else SRCDIRBUILD=$BUILD # use the number from the arm/build script fi if [ -r $CWD/makepkg/${PKGNAME} ]; then echo "**** Executing custom makepkg $CWD/makepkg/${PKGNAME} ****" # In the old days we kept using tgz for a while. This is a reminder of # how to edit those makepkg scripts: #sed -e 's?.txz?.tgz?g' $CWD/makepkg/${PKGNAME} > ${SLACK_X_BUILD_DIR}/${PKGNAME}.makepkg #BUILD=$MODBUILD . ${SLACK_X_BUILD_DIR}/${PKGNAME}.makepkg # But for Slackware 15.0 we'll use the upstream scripts which drop their pkgs in to $SLACK_X_BUILD_DIR BUILD=$MODBUILD . $CWD/makepkg/${PKGNAME} # Install & upgrade the new packages just built: upgradepkg --reinstall --install-new ${SLACK_X_BUILD_DIR}/*.t?z # Delete the previous versions from the Slackware ARM distributable tree: ( cd ${SLACK_X_BUILD_DIR} for i in *-[0-9]*.t?z ; do # Wipe old packages from the Slackware tree - this caters for packages who share # the same first name - eg xcb-util, xcb-util-foo ( PKGNAM=$( short_package_name $i ) /usr/share/slackdev/slackwipepkg ) done ) # Move the new packages into the Slackware ARM distributable tree: ( cd ${SLACK_X_BUILD_DIR} mv -fv *.t?z $PKGSTORE/x/ ) else makepkg -l y -c n ${SLACK_X_BUILD_DIR}/x11-${x_source_dir}-${VERSION}-${PKGARCH}-${SRCDIRBUILD}.txz # Install & upgrade the new packages just built: upgradepkg --reinstall --install-new ${SLACK_X_BUILD_DIR}/*.t?z # Delete the previous versions from the Slackware ARM distributable tree: ( cd ${SLACK_X_BUILD_DIR} for i in *-[0-9]*.t?z ; do # Wipe old packages from the Slackware tree - this caters for packages who share # the same first name - eg xcb-util, xcb-util-foo ( PKGNAM=$( short_package_name $i ) /usr/share/slackdev/slackwipepkg ) done ) # Move the new packages into the Slackware ARM tree: ( cd ${SLACK_X_BUILD_DIR} mv -fv *.t?z $PKGSTORE/x/ ) fi fi # "fi" from "if [ -d ${SLACK_X_BUILD_DIR}/package-${x_source_dir}/etc -o -d ${SLACK_X_BUILD_DIR}/package-${x_source_dir}/usr ]; then" ) done ) #echo #echo "***************************************************************" #echo "** REMEMBER: The finished packages are in the temporary build *" #echo "** space: *" #echo "** $SLACK_X_BUILD_DIR " #echo