% \iffalse meta-comment
%
% Copyright 1994 the LaTeX3 project and the individual authors.
% All rights reserved. For further copyright information see the file
% legal.txt, and any other copyright indicated in this file.
% 
% This file is part of the LaTeX2e system.
% ----------------------------------------
% 
%  This system is distributed in the hope that it will be useful,
%  but WITHOUT ANY WARRANTY; without even the implied warranty of
%  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
% 
% 
% IMPORTANT NOTICE:
% 
% For error reports in case of UNCHANGED versions see bugs.txt.
% 
% Please do not request updates from us directly.  Distribution is
% done through Mail-Servers and TeX organizations.
% 
% You are not allowed to change this file.
% 
% You are allowed to distribute this file under the condition that
% it is distributed together with all files mentioned in manifest.txt.
% 
% If you receive only some of these files from someone, complain!
% 
% You are NOT ALLOWED to distribute this file alone.  You are NOT
% ALLOWED to take money for the distribution or use of either this
% file or a changed version, except for a nominal charge for copying
% etc.
% \fi
% \CheckSum{165}
%% \CharacterTable
%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%%   Digits        \0\1\2\3\4\5\6\7\8\9
%%   Exclamation   \!     Double quote  \"     Hash (number) \#
%%   Dollar        \$     Percent       \%     Ampersand     \&
%%   Acute accent  \'     Left paren    \(     Right paren   \)
%%   Asterisk      \*     Plus          \+     Comma         \,
%%   Minus         \-     Point         \.     Solidus       \/
%%   Colon         \:     Semicolon     \;     Less than     \<
%%   Equals        \=     Greater than  \>     Question mark \?
%%   Commercial at \@     Left bracket  \[     Backslash     \\
%%   Right bracket \]     Circumflex    \^     Underscore    \_
%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%%   Right brace   \}     Tilde         \~}
%
% \iffalse
% Copyright (C) 1991,1992 by Leslie Lamport \and
% Copyright (C) 1994 by the \LaTeX3 project \and Johannes Braams
%
% \changes{v1.1}{1994/01/25}{Made `proc' a document class and provide
%    a .sty file for compatibility mode}
% \changes{v1.2}{1994/01/26}{Removed the setting of a number of
%    variables that became superfluous by passing the twocolumn option
%    to the article class}
% \changes{v1.3}{1994/03/01}{Moved driver further up; added overview
%    of docstrip modules; added \cmd\CheckSum, \cmd\StopEventually and
%    \cmd\Finale}
% \changes{v1.3e}{1994/05/22}{Use new warning and error commands}
% \changes{v1.3f}{1994/05/26}{Inserted missing 'v's in \cmd\changes
%    entries}
% \changes{v1.3f}{1994/05/26}{Moved identification and driver to the
%    front of the file; these sections now no longer print}
%
% \subsection{Identification}
%
%    This document class can only be used with \LaTeXe, so it is made
%    sure that an appropiate message is displayed when another \TeX{}
%    format is used.
%    \begin{macrocode}
%<+class|style>\NeedsTeXFormat{LaTeX2e}
%    \end{macrocode}
%
%    Announce the document class and its version.
% \changes{v1.3c}{1994/04/15}{Added missing / guard}
% \changes{v1.3d}{1994/05/01}{Removed the use of variables such as
%    \cmd\fileversion}
% \changes{v1.3b}{1994/03/16}{Removed use of \cmd\wlog, no longer
%    needed}
% \changes{v1.3f}{1994/05/26}{Removed \cmd\typeout from .sty file;
%    changed description}
% \changes{v1.3h}{1994/05/26}{The second argument to \cmd\ProvidesFile
%    wasn't closed in the driver and the style file}
%
%    \begin{macrocode}
%<*driver>
\ProvidesFile{proc.drv}
%</driver>
%<+class>\ProvidesClass{proc}
%<+style>\ProvidesFile{proc.sty}
              [1994/05/27 v1.3i
%<+class>               Standard LaTeX document class]
%<+style>               LaTeX 2.09 compatibility style option `proc']
%    \end{macrocode}
%
% \subsection{The documentation driver file}
%
%    This bit of code contains the documentation driver file for
%    \TeX{}, i.e., the file that will produce the documentation you
%    are currently reading. It can be extracted from this file by the
%    {\sc docstrip} program.
%    \begin{macrocode}
%<*driver>
]
\documentclass{ltxdoc}
\GetFileInfo{proc.drv}
\begin{document}
\newcommand\Lopt[1]{\textsf {#1}}
\DocInput{proc.dtx}
\end{document}
%</driver>
%    \end{macrocode}
% \fi
%
% \title{Producing proceedings articles with \LaTeXe\thanks
%    {File version \fileversion, dated \filedate}} 
%
% \author{%
%  Johannes Braams\and
%  David Carlisle\and
%  Alan Jeffrey\and
%  Leslie Lamport\and
%  Frank Mittelbach\and
%  Chris Rowley\and
%  Rainer Sch\"opf}
% 
% \date{\filedate}
%
% \maketitle
%
% \section{Description}
%
%    This \LaTeXe\ document class is designed to produce camera-ready
%    conference proceedings. It is based upon the document class
%    \texttt{article}, but modifies some of its layout decisions.
%    It also adds one command.
%
%    For compatibility with \LaTeX2.09 a \texttt{.sty} version is
%    provided because \texttt{proc} used to be a style file. The
%    \texttt{.sty} file can \emph{not} be used as a package however.
%
% \DescribeMacro\copyrightspace
%    The |\copyrightspace| command is used to produce a blank space in
%    the first column where a copyright notice belongs.  Note that it
%    should appear after any |\footnote| commands that produce
%    footnotes for the first column.
%
% \StopEventually{}
%
% \section{The {\sc docstrip} modules}
%
% The following modules are used in the implementation to direct
% {\sc docstrip} in generating the external files:
% \begin{center}
% \begin{tabular}{ll}
%   class   & produce the proc document class\\
%   sty     & produce proc.sty for compatibility mode\\
%   driver  & produce a documentation driver file \\
% \end{tabular}
% \end{center}
%
% \section{Implementation}
%
%    In this case a check is needed to see wether \LaTeXe\ runs in
%    compatibility mode. 
% \changes{v1.3i}{1994/05/27}{Added missing docstrip guard}
%    \begin{macrocode}
%<*style>
\if@compatibility
%    \end{macrocode}
%    In this case processing silently continues, but in the |\else|
%    case a warning is issued and reading of this file stops.
%    \begin{macrocode}
\else
  \ClassWarningNoLine{proc}{^^J\@spaces%
    You requested the use of `proc' as a package^^J\@spaces%
    but it has been turned into a document class.^^J\@spaces%
    Please change your file to use `proc' as a class.^^J}
  \expandafter\endinput
\fi
%</style>
%    \end{macrocode}
%
%    Paper sizes smaller than A4 are not supported.
%    \begin{macrocode}
%<*class>
\DeclareOption{a5paper}
    {\ClassError{proc}{Option `a5paper' not supported}{}}
\DeclareOption{b5paper}
    {\ClassError{proc}{Option `b5paper' not supported}{}}
%    \end{macrocode}
%
%    Also the \Lopt{onecolumn} option is disabled in this document
%    class. 
%    \begin{macrocode}
\DeclareOption{onecolumn}%
    {\ClassError{proc}{Option `onecolumn' not supported}{}}
%    \end{macrocode}
%
%    Proceedings articles never have separate titlepages, therefore
%    this option is disabled.
%    \begin{macrocode}
\DeclareOption{titlepage}%
    {\ClassError{proc}{Option `titlepage' not supported}{}}
%    \end{macrocode}
%
%    Always print in two column mode.
%    \begin{macrocode}
\PassOptionsToClass{twocolumn}{article}
%    \end{macrocode}
%
%    Any other options are passed on to the article class on which
%    this document class is based.
%    \begin{macrocode}
\DeclareOption*{\PassOptionsToClass{\CurrentOption}{article}}
%    \end{macrocode}
%
%    Now we can process the options
%    \begin{macrocode}
\ProcessOptions
%    \end{macrocode}
%
%    and load the article document class.
%    \begin{macrocode}
\LoadClass{article}
%</class>
%    \end{macrocode}
%
% \section{Document Layout}
%
%    Proceedings articles have a different layout than normal
%    articles. Therefore some of the layout parameters are given
%    different values here.
%
% \subsection{Page Layout}
%
% \subsubsection{Vertical spacing}
%
% \begin{macro}{\footskip}
%    The distance from the baseline of the box which contains the
%    running footer to the baseline of last line of text is controlled
%    by the |\footskip|.
%    \begin{macrocode}
%<*class|style>
\setlength\footskip{75\p@}
%    \end{macrocode}
% \end{macro}
%
% \subsubsection{The dimension of text}
%
% \begin{macro}{\textwidth}
%    When \LaTeXe\ runs in compatibility mode it has to be made sure
%    that the dimensions of the printed area are not different from
%    what the user was used to see.
%
%    \begin{macrocode}
\if@compatibility
  \setlength\textwidth{6.75in}
\else
  \setlength\textwidth{\paperwidth}
  \addtolength\textwidth{-126\p@}
  \@settopoint\textwidth
\fi
%    \end{macrocode}
%
%    Here the width of the text a little is modified to be a whole
%    number of points.
%    \begin{macrocode}
\if@compatibility
\else
  \@settopoint\textwidth
\fi
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\textheight}
%    Now that we have computed the width of the text, we have to take
%    care of the height. The |\textheight| is the height of text
%    (including footnotes and figures, excluding running head and
%    foot).
%
%    \begin{macrocode}
\if@compatibility
  \setlength\textheight{9in}
\else
  \ifcase\@ptsize
    \setlength\textheight{53\baselineskip}
  \or
    \setlength\textheight{47\baselineskip}
  \or
    \setlength\textheight{44\baselineskip}
  \fi
\fi
%    \end{macrocode}
%
%    The first line on the page has a height of |\topskip|.
%    \begin{macrocode}
\advance\textheight by \topskip
%    \end{macrocode}
% \end{macro}
%
% \subsubsection{Margins}
%
% \begin{macro}{\oddsidemargin}
% \begin{macro}{\evensidemargin}
%    The width of the text is quite large, therefore the margins
%    have a negative width.
%    \begin{macrocode}
\setlength\oddsidemargin{-10\p@}
\setlength\evensidemargin{-10\p@}
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\marginparwidth}
%    Because we have such a large |\textwidth| there is no real room
%    for notes in the margins.
%    \begin{macrocode}
\setlength\marginparwidth {\z@}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\topmargin}
%    The |\topmargin| is the distance between the top of `the
%    printable area' --which is 1 inch below the top of the paper--
%    and the top of the box which contains the running head.
%    \begin{macrocode}
\setlength\topmargin{-47\p@}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\columnsep}
%    Proceedings articles are always set in |\twocolumn| mode,
%    therefore the distance between the two columns  (|\columnsep|)is
%    set to a non zero value.
%    \begin{macrocode}
\setlength\columnsep{.375in}
%    \end{macrocode}
% \end{macro}
%
% \subsection{The page style}
%
%    The user can use |\markright| (or |\markboth|) to put an
%    identification in the lower left side of the page.  The page
%    number is printed in the lower right side of the page.
%
%    This works as long as he doesn't use either |\pagestyle| or
%    |\thispagestyle| comands.
% \changes{v1.3f}{1994/05/26}{changed \cmd\rm to
%    \cmd\normalfont\cmd\rmfamily}
%    \begin{macrocode}
\let\@oddhead\@empty
\let\@evenhead\@empty
\def\@oddfoot{\normalfont\rmfamily\rightmark \hfil
              \pagename{} \thepage}
\def\@evenfoot{\@oddfoot}
%    \end{macrocode}
%
%
% \section{Document Markup}
%
% \subsection{The title}
%
% \begin{macro}{\maketitle}
%    The defintion of |\maketitle| here is basically the same as the
%    one in the document class \texttt{article}, but the pagestyle is
%    \emph{not} set to \texttt{plain}.
%
%    \begin{macrocode}
\def\maketitle{\par
 \begingroup
   \renewcommand\thefootnote{\fnsymbol{footnote}}%
   \def\@makefnmark{\hbox to\z@{$\m@th^{\@thefnmark}$\hss}}%
%    \end{macrocode}
%    This document class always uses two column mode but the title is
%    set to the full width of the text. 
%    \begin{macrocode}
   \twocolumn[\@maketitle]%
   \@thanks
 \endgroup
 \setcounter{footnote}{0}%
 \let\maketitle\relax
 \let\@maketitle\relax
 \gdef\@thanks{}\gdef\@author{}\gdef\@title{}\let\thanks\relax}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@maketitle}
%    This macro takes care of formatting the title information.
%
%    The information is set inside |\vbox| with a width of
%    |\textwidth| and a hight of 2.25in. The text is vertically and
%    hirizontally centered.
%    \begin{macrocode}
\def\@maketitle{%
  \vbox to 2.25in{%
    \hsize\textwidth
    \linewidth\hsize
    \vfil
    \centering
    {\LARGE \@title \par}
    \vskip 2em
    {\large \begin{tabular}[t]{c}\@author \end{tabular}\par}
    \vfil}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\copyrightspace}
%    The |\copyrightspace| command is used to produce a blank space in
%    the first column where a copyright notice belongs.  It works by
%    producing a blank footnote of the appropriate size.
%
%    \begin{macrocode}
\def\copyrightspace{%
  \footnotetext[0]{\mbox{}\vrule \@height 97\p@ \@width \z@}}
%    \end{macrocode}
% \end{macro}
%
% \subsection{Modifying environments}
%
% \subsubsection{Abstract}
%
% \begin{macro}{\abstract}
%    For this document class the definition of the abstract
%    environment is quit simple.
%
%    \begin{macrocode}
\renewenvironment{abstract}%
  {\section*{\abstractname}}
  {\par}
%    \end{macrocode}
% \end{macro}
%
% \section{Initialization}
%
% \subsection{Words}
%
% \begin{macro}{\pagename}
%    This document class is for documents prepared in the English
%    language. To prepare a version for another language, one English
%    word must be replaced.  It is defined below in a command name. 
%    \begin{macrocode}
\newcommand\pagename{Page}
%</class|style>
%    \end{macrocode}
% \end{macro}
%
% \Finale
%
\endinput