% \CheckSum{613}
%
%\iffalse   % this is a METACOMMENT !
%
%
%% Package `verbatim' to use with LaTeX2e
%% Copyright (C) 1989--1994 by Rainer Sch\"opf. All rights reserved.
%
% Copying of this file is authorized only if either
% (1) you make absolutely no changes to your copy, including name, or
% (2) if you do make changes, you name it something other than
%     verbatim.dtx.
% This restriction helps ensure that all styles developed here
% remain identical.
%
%
%
% \section{Producing the documentation}
%
% We provide a short driver file that can be extracted by the 
% \textsf{DocStrip} program using the conditional `\textsf{driver}'.  To
% allow the use of \texttt{docstrip.dtx} as a program (e.g., to strip
% off its own comments) we don't use a conditional block, but
% rather individual `+' guards. Otherwise, \texttt{docstrip.dtx}
% couldn't be run directly through \TeX{} any longer.
%
% \DoNotIndex{\alpha,\begin,\CodelineIndex,\columnsep,\columnseprule}
% \DoNotIndex{\columnwidth,\DisableCrossrefs,\DocInput,\documentstyle}
% \DoNotIndex{\EnableCrossrefs,\end,\ended,\evensidemargin,\headheight}
% \DoNotIndex{\headsep,\input,\leftmargini,\leftmarginv,\leftmarginvi}
% \DoNotIndex{\MakeShortVerb,\marginparsep,\marginparwidth,\newcommand}
% \DoNotIndex{\newenvironment,\newpage,\oddsidemargin,\onecolumn}
% \DoNotIndex{\OnlyDescription,\pagestyle,\PrintChanges,\PrintIndex}
% \DoNotIndex{\RecordChanges,\renewcommand,\rm}
% \DoNotIndex{\setcounter,\setlength,\test,\textheight,\textwidth}
% \DoNotIndex{\theCodelineNo,\tiny,\topmargin,\twocolumn}
%    \begin{macrocode}
%<*driver>
\documentclass{ltxdoc}

\pagestyle{myheadings}

\title{A New Implementation of \LaTeX{}'s \\ \texttt{verbatim}
       and \texttt{verbatim*} Environments.}
\author{Rainer Sch\"opf\\
        Konrad-Zuse-Zentrum\\
        f\"ur Informationstechnik Berlin\\
        Heilbronner Str.\ 10\\
        D-10711 Berlin-Tiergarten\\
        Federal Republic of Germany\\
        Internet: \texttt{Schoepf@sc.ZIB-Berlin.De}
        \and
        Bernd Raichle\\
        Stettener Str.~73\\
        D-73732 W\"aldenbronn\\
        Federal Republic of Germany\\
        Internet: \texttt{raichle@azu.Informatik.Uni-Stuttgart.DE}
        \and
        Chris Rowley\\
        The Open University\\
        Parsifal College\\
        Finchley Road\\
        London NW3 7BG, England, UK\\
        Internet: \texttt{C.A.Rowley@open.ac.uk}}
\date{1994/06/10}
\begin{document}
\markboth
   {Verbatim style option, version \fileversion, as of \filedate}
   {Verbatim style option, version \fileversion, as of \filedate}
\maketitle
  \DocInput{verbatim.dtx}
\end{document}
%</driver>
%    \end{macrocode}
%
%
%\fi
%
% \let\cs=\relax
%
% \changes{v1.5e}{1994/06/10}{Added missing closing verbtest guard.}
% \changes{v1.5d}{1994/05/30}{\cs{NeedsTeXFormat} and
%                             \cs{ProvidesPackage} added.}
% \changes{v1.5d}{1994/05/30}{\cs{addto@hook} removed, now in kernel.}
% \changes{v1.5a}{1993/10/12}{Included \cs{newverbtext} command, as
%          written by Chris Rowley.}
% \changes{v1.5}{1993/10/11}{Included vrbinput style option by Bernd
%          Raichle.}
%
% \changes{v1.4j}{1992/06/30}{Used \cs{lowercase}{\cs{endgroup} \ldots}
%          trick proposed by Bernd Raichle; changed all \cs{gdef}
%          to \cs{def}
%          since no longer necessary.}
% \changes{v1.4g}{1991/11/21}{Several improvements in the
%                           documentation.}
% \changes{v1.4f}{1991/08/05}{Corrected bug in documentation.
%                           Found by Bernd Raichle.}
% \changes{v1.4e}{1991/07/24}{Avoid reading this file twice.}
% \changes{v1.4d}{1991/04/24}{\cs{penalty}\cs{interlinepenalty} added to
%                           definition of \cs{par} in \cs{@verbatim}.
%                           Necessary to avoid page breaks in
%                           the scope of a \cs{samepage} declaration.}
% \changes{v1.4c}{1990/10/18}{Added \cs{leavevmode} to definition of
%       backquote macro.}
% \changes{v1.4b}{1990/07/14}{Converted nearly all \cs{verb}'s to
%       \texttt{\protect\string!|\ldots\protect\string!|}.}
% \changes{v1.4a}{1990/04/04}{Added a number of percent characters
%       to suppress blank space at the end of some code lines.}
% \changes{v1.4}{1990/03/07}{\cs{verb} rewritten.}
%
% \changes{v1.3a}{1990/02/04}{Removed \texttt{verbatimwrite} environment
%       from the code. Now only shown as an example.}
%
% \changes{v1.2g}{1990/02/01}{Revised documentation.}
% \changes{v1.2e}{1990/01/15}{Added \cs{every@verbatim} hook.}
% \changes{v1.2d}{1989/11/29}{Use token register \cs{@temptokena}
%                           instead of macro \cs{@tempb}.}
% \changes{v1.2d}{1989/11/29}{Use token register \cs{verbatim@line}
%                           instead of macro \cs{@tempd}.}
% \changes{v1.2b}{1989/10/25}{\cs{verbatimfile} renamed to
%           \cs{verbatiminput}. Suggested by Reinhard Wonneberger.}
%
% \changes{v1.1a}{1989/10/16}{\cs{verb} added.}
% \changes{v1.1}{1989/10/09}{Made the code more modular (as suggested by
%                          Chris Rowley):  introduced
%                          \cs{verbatim@addtoline}, etc.  Added
%                          \cs{verbatimwrite} environment.}
%
% \changes{v1.0e}{1989/07/17}{Fixed bug in \cs{verbatimfile} (*-form
%         handling, discovered by Dirk Kreimer).}
% \changes{v1.0d}{1989/05/16}{Revised documentation, fixed silly bug
%         in \cs{verbatim@@@}.}
% \changes{v1.0c}{1989/05/12}{Added redefinition of \cs{@sverb}, change
%         in end-of-line handling.}
% \changes{v1.0b}{1989/05/09}{Change in \cs{verbatim@rescan}.}
% \changes{v1.0a}{1989/05/07}{Change in \cs{verbatim@@testend}.}
%
%
% \DoNotIndex{\ ,\!,\C,\[,\\,\],\^,\`,\{,\},\~}
% \DoNotIndex{\@M,\@empty,\@flushglue,\@gobble,\@ifstar,\@ifundefined}
% \DoNotIndex{\@namedef,\@spaces,\@tempa,\@tempb,\@tempc,\@tempd}
% \DoNotIndex{\@temptokena,\@totalleftmargin,\@warning,\active}
% \DoNotIndex{\aftergroup,\arabic,\begingroup,\catcode,\char,\closein}
% \DoNotIndex{\csname,\def,\do,\docdate,\dospecials,\edef,\else}
% \DoNotIndex{\endcsname,\endgraf,\endgroup,\endinput,\endlinechar}
% \DoNotIndex{\endtrivlist,\expandafter,\fi,\filedate,\fileversion}
% \DoNotIndex{\frenchspacing,\futurelet,\if,\ifcat,\ifeof,\ifnum}
% \DoNotIndex{\ifx,\immediate,\item,\kern,\lccode,\leftskip,\let}
% \DoNotIndex{\lowercase,\m@ne,\makeatletter,\makeatother,\newread}
% \DoNotIndex{\newread,\next,\noexpand,\noindent,\openin,\parfillskip}
% \DoNotIndex{\parindent,\parskip,\penalty,\read,\relax,\rightskip}
% \DoNotIndex{\sloppy,\space,\string,\the,\toks@,\trivlist,\tt,\typeout}
% \DoNotIndex{\vskip,\write,\z@}
%
% \begin{abstract}
%   This package reimplements the \LaTeX{} \texttt{verbatim} and
%   \texttt{verbatim*} environments.
%   In addition it provides a \texttt{comment} environment
%   that skips any commands or text between
%   |\begin{comment}|
%   and the next |\end{comment}|.
%   It also defines the command \texttt{verbatiminput} to input a whole
%   file verbatim.
% \end{abstract}
%
% \section{Usage notes}
%
% \let\docDescribeMacro\DescribeMacro
% \let\docDescribeEnv\DescribeEnv
% \def\DescribeMacro#1{}
% \def\DescribeEnv#1{}
% \LaTeX's \texttt{verbatim} and \texttt{verbatim*} environments
% have a few features that may give rise to problems. These are:
% \begin{itemize}
%   \item
%     Due to the method used to detect the closing |\end{verbatim}|
%     (i.e.\ macro parameter delimiting) you cannot leave spaces
%     between the |\end| token and |{verbatim}|.
%   \item
%     Since \TeX{} has to read all the text between the
%     |\begin{verbatim}| and the |\end{verbatim}| before it can output
%     anything, long verbatim listings may overflow \TeX's memory.
% \end{itemize}
% Whereas the first     of these points can be considered
% only a minor nuisance the other one is a real limitation.
%
%
% \DescribeEnv{verbatim}
% \DescribeEnv{verbatim*}
% This package file contains a reimplementation of the \texttt{verbatim}
% and \texttt{verbatim*} environments which overcomes these
% restrictions.
% There is, however, one incompatibility between the old and the
% new implementations of these environments: the old version
% would treat text on the same line as the |\end{verbatim}|
% command as if it were on a line by itself.
% \begin{center}
%   \bf This new version will simply ignore it.
% \end{center}
% (This is the price one has to pay for the removal of the old
% \texttt{verbatim} environment's size limitations.)
% It will, however, issue a warning message of the form
% \begin{verbatim}
%LaTeX warning: Characters dropped after \end{verbatim*}!
%\end{verbatim}
% This is not a real problem since this text can easily be put
% on the next line without affecting the output.
%
% This new implementation also solves the second problem mentioned
% above: it is possible to leave spaces (but \emph{not} begin a new
% line) between the |\end| and the |{verbatim}| or |{verbatim*}|:
% \begin{verbatim}
%\begin {verbatim*}
%   test
%   test
%\end {verbatim*}
%\end{verbatim}
%
% \DescribeEnv{comment}
% Additionally we introduce a \texttt{comment} environment, with the
% effect that the text between |\begin{comment}| and |\end{comment}|
% is simply ignored, regardless of what it looks like.
% At first sight this seems to be quite different from the purpose
% of verbatim listing, but actually the implementation of these two
% concepts turns out to be very similar.
% Both rely on the fact that the text between |\begin{...}| and
% |\end{...}| is read by \TeX{} without interpreting any commands or
% special characters.
% The remaining difference between \texttt{verbatim} and
% \texttt{comment} is only that the text is to be typeset in the
% first case and to be thrown away in the latter. Note that these
% environments cannot be nested.
%
% \DescribeMacro{\verbatiminput}
% |\verbatiminput| is a command with one argument that inputs a file
% verbatim, i.e.\ the command |verbatiminput{xx.yy}|
% has the same effect as\\[2pt]
%   \hspace*{\MacroIndent}|\begin{verbatim}|\\
%   \hspace*{\MacroIndent}\meta{Contents of the file \texttt{xx.yy}}\\
%   \hspace*{\MacroIndent}|\end{verbatim}|\\[2pt]
% This command has also a |*|-variant that prints spaces as \verb*+ +.
%
%
% \StopEventually{}
%
%
% \section{Interfaces for package writers}
%
% The \texttt{verbatim} environment of \LaTeXe{} does not
% offer a good interface to programmers.
% In contrast, this package provides a simple mechanism to
% implement similar features, the \texttt{comment} environment
% implemented here being an example of what can be done and how.
%
%
% \subsection{Simple examples}
%
% It is now possible to use the \texttt{verbatim} environment to define
% environments of your own.
% E.g.,
%\begin{verbatim}
% \newenvironment{myverbatim}%
%   {\endgraf\noindent MYVERBATIM:%
%    \endgraf\verbatim}%
%   {\endverbatim}
%\end{verbatim}
% can be used afterwards like the \texttt{verbatim} environment, i.e.
% \begin{verbatim}
%\begin {myverbatim}
%  test
%  test
%\end {myverbatim}
%\end{verbatim}
% Another way to use it is to write
% \begin{verbatim}
%\let\foo=\comment
%\let\endfoo=\endcomment
%\end{verbatim}
% and from that point on environment \texttt{foo} is the same as the
% comment environment, i.e.\ everything inside its body is ignored.
%
% You may also add special commands after the |\verbatim| macro is
% invoked, e.g.
%\begin{verbatim}
%\newenvironment{myverbatim}%
%  {\verbatim\myspecialverbatimsetup}%
%  {\endverbatim}
%\end{verbatim}
% though you may want to learn about the hook |\every@verbatim| at
% this point.
% However, there are still a number of restrictions:
% \begin{enumerate}
%   \item
%     You must not use |\begin{verbatim}| inside a definition, e.g.
%     \begin{verbatim*}
%\newenvironment{myverbatim}%
%{\endgraf\noindent MYVERBATIM:%
% \endgraf\begin{verbatim}}%
%{\end{verbatim}}
%\end{verbatim*}
%     If you try this example, \TeX{} will report a
%     ``runaway argument'' error.
%     More generally, it is not possible to use
%     |\begin{verbatim}|\ldots\allowbreak|\end{verbatim}|
%     or the related environments in the definition of the new
%     environment.
%   \item
%     You can\emph{not} use the \texttt{verbatim} environment inside
%     user defined \emph{commands}; e.g.,
% \changes{v1.4g}{1991/11/21}{Corrected wrong position of optional
%        argument to \cs{newcommand}. Discovered by Piet van Oostrum.}
%     \begin{verbatim*}
%\newcommand{\verbatimfile}[1]%
%           {\begin{verbatim}\input{#1}\end{verbatim}}
%\end{verbatim*}
%     does \emph{not} work; nor does
%     \begin{verbatim}
%\newcommand{\verbatimfile}[1]{\verbatim\input{#1}\endverbatim}
%\end{verbatim}
%   \item The name of the newly defined environment must not contain
%     characters with category code other than $11$ (letter) or
%     $12$ (other), or this will not work.
% \end{enumerate}
%
%
% \subsection{The interfaces}
%
% \DescribeMacro{\verbatim@font}
% Let us start with the simple things.
% Sometimes it may be necessary to use a special typeface for your
% verbatim text, or perhaps the usual computer modern typewriter shape
% in a reduced size.
%
% You may select this by redefining the macro |\verbatim@font|.
% This macro is executed at the beginning of every verbatim text to
% select the font shape.
% Do not use it for other purposes; if you find yourself abusing this
% you may want to read about the |\every@verbatim| hook below.
%
% By default, |\verbatim@font| switches to the typewriter font and
% disables the ligatures contained therein.
%
%
% \DescribeMacro{\every@verbatim}
% \DescribeMacro{\addto@hook}
% There is a hook (i.e.\ a token register) called |\every@verbatim|
% whose contents are inserted into \TeX's mouth just before every
% verbatim text.
% Please use the |\addto@hook| macro to add something to this hook.
% It is used as follows:\\[2pt]
% \hspace*{\MacroIndent}|\addto@hook|\meta{name of the hook}^^A
%  |{|\meta{commands to be added}|}|
% \vspace*{2pt}
%
%
%
% \DescribeMacro{\verbatim@start}
% After all specific setup, like switching of category codes, has been
% done, the |\verbatim@start| macro is called.
% This starts the main loop of the scanning mechanism implemented here.
% Any other environment that wants to make use of this feature should
% execute this macro as its last action.
%
%
% \DescribeMacro{\verbatim@startline}
% \DescribeMacro{\verbatim@addtoline}
% \DescribeMacro{\verbatim@processline}
% \DescribeMacro{\verbatim@finish}
% These are the things that concern the start of a verbatim
% environment.
% Once this (and other) setup has been done, the code in this package
% reads and processes characters from the input stream in the
% following way:
% \begin{enumerate}
%   \item Before the first character of an input line is read, it
%     executes the macro |\verbatim@startline|.
%   \item After some characters have been read, the macro
%     |\verbatim@addtoline| is called with these characters as its only
%     argument.
%     This may happen several times per line (when an |\end| command is
%     present on the line in question).
%   \item When the end of the line is reached, the macro
%     |\verbatim@processline| is called to process the characters that
%     |\verbatim@addtoline| has accumulated.
%   \item Finally, there is the macro |\verbatim@finish| that is called
%     just before the environment is ended by a call to the |\end|
%      macro.
% \end{enumerate}
%
%
% To make this clear let us consider the standard \texttt{verbatim}
% environment.
% In this case the three macros above are defined as follows:
% \begin{enumerate}
%   \item |\verbatim@startline| clears the character buffer
%     (a token register).
%   \item |\verbatim@addtoline| adds its argument to the character
%     buffer.
%   \item |\verbatim@processline| typesets the characters accumulated
%     in the buffer.
% \end{enumerate}
% With this it is very simple to implement the \texttt{comment}
% environment:
% in this case |\verbatim@startline| and |\verbatim@processline| are
% defined to be
% no-ops whereas |\verbatim@addtoline| discards its argument.
%
%
% Let's use this to define a variant of the |verbatim|
% environment that prints line numbers in the left margin.
% Assume that this would be done by a counter called |VerbatimLineNo|.
% Assuming that this counter was initialized properly by the
% environment, |\verbatim@processline| would be defined in this case as
% \begin{verbatim}
%\def\verbatim@processline{%
%  \addtocounter{VerbatimLineNo}{1}%
%  \leavevmode
%  \llap{\theVerbatimLineNo\ \hskip\@totalleftmargin}%
%  \the\verbatim@line\par}
%\end{verbatim}
%
% A further possibility is to define a variant of the |verbatim|
% environment that boxes and centers the whole verbatim text.
% Note that the boxed text should be less than a page otherwise you
% have to change this example.
%
%\begin{verbatim}
%\def\verbatimboxed#1{\begingroup
%  \def\verbatim@processline{%
%    {\setbox0=\hbox{\the\verbatim@line}%
%     \hsize=\wd0
%     \the\verbatim@line\par}}%
%  \setbox0=\vbox{\parskip=0pt\topsep=0pt\partopsep=0pt
%                 \verbatiminput{#1}}%
%  \begin{center}\fbox{\box0}\end{center}%
% \endgroup}
%\end{verbatim}
%
% As a final nontrivial example we describe the definition of an
% environment called \texttt{verbatimwrite}.
% It writes all text in its body to a file whose name is
% given as an argument.
% We assume that a stream number called |\verbatim@out| has already
% been reserved by means of the |\newwrite| macro.
%
% Let's begin with the definition of the macro |\verbatimwrite|.
% \begin{verbatim}
%\def\verbatimwrite#1{%
%\end{verbatim}
% First we call |\@bsphack| so that this environment does not influence
% the spacing.
% Then we open the file and set the category codes of all special
% characters:
% \begin{verbatim}
%  \@bsphack
%  \immediate\openout \verbatim@out #1
%  \let\do\@makeother\dospecials
%  \catcode`\^^M\active
%\end{verbatim}
% The default definitions of the macros
% \begin{verbatim}
%  \verbatim@startline
%  \verbatim@addtoline
%  \verbatim@finish
%\end{verbatim}
% are also used in this environment.
% Only the macro |\verbatim@processline| has to be changed before
% |\verbatim@start| is called:
% \begin{verbatim}
%  \def\verbatim@processline{%
%    \immediate\write\verbatim@out{\the\verbatim@line}}%
%  \verbatim@start}
%\end{verbatim}
% The definition of |\endverbatimwrite| is very simple:
% we close the stream and call |\@esphack| to get the spacing right.
% \begin{verbatim}
%\def\endverbatimwrite{\immediate\closeout\verbatim@out\@esphack}
%\end{verbatim}
%
% \section{The implementation}
%
% \let\DescribeMacro\docDescribeMacro
% \let\DescribeEnv\docDescribeEnv
%
% \changes{v1.4e}{1991/07/24}{Avoid reading this file twice.}
% The very first thing we do is to ensure that this file is not read
% in twice. To this end we check whether the macro |\verbatim@@@| is
% defined. If so, we just stop reading this file. The `package'
% guard here allows most of the code to be excluded when extracting
% the driver file for testing this package.
%    \begin{macrocode}
%<*package>
\NeedsTeXFormat{LaTeX2e}
\ProvidesPackage{verbatim}
     [1994/06/10 v1.5e LaTeX2e package for verbatim enhancements]
\@ifundefined{verbatim@@@}{}{\endinput}
%    \end{macrocode}
%
% We use a mechanism similar to the one implemented for the
% |\comment|\ldots\allowbreak|\endcomment| macro in \AmSTeX:
% We input one line at a time and check if it contains the |\end{...}|
% tokens.
% Then we can decide whether we have reached the end of the verbatim
% text, or must continue.
%
% As always we begin by identifying the latest version of this file on
% the VDU and in the transcript file.
%    \begin{macrocode}
\typeout{Package: `verbatim'
   \fileversion \space <\filedate>  (RmS)}
\typeout{English Documentation
   \@spaces <\docdate>  (RmS)}
%    \end{macrocode}
%
%
% \subsection{Preliminaries}
%
% \begin{macro}{\every@verbatim}
%    The hook (i.e.\ token register) |\every@verbatim|
%    is initialized to \meta{empty}.
%    \begin{macrocode}
\newtoks\every@verbatim
\every@verbatim={}
%    \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\@makeother}
% \changes{v1.1a}{1989/10/16}{\cs{@makeother} added.}
%    |\@makeother| takes as argument a character and changes
%    its category code to $12$ (other).
%    \begin{macrocode}
\def\@makeother#1{\catcode`#112\relax}
%    \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\@vobeyspaces}
% \changes{v1.5}{1993/10/11}{Changed definition to not use \cs{gdef}.}
% \changes{v1.1a}{1989/10/16}{\cs{@vobeyspaces} added.}
%    The macro |\@vobeyspaces| causes spaces in the input
%    to be printed as spaces in the output.
%    \begin{macrocode}
\begingroup
 \catcode`\ =\active%
 \def\x{\def\@vobeyspaces{\catcode`\ \active\let \@xobeysp}}
 \expandafter\endgroup\x
%    \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\@xobeysp}
% \changes{v1.1a}{1989/10/16}{\cs{@xobeysp} added.}
%    The macro |\@xobeysp| produces exactly one space in
%    the output, protected against breaking just before it.
%    (|\@M| is an abbreviation for the number $10000$.)
%    \begin{macrocode}
\def\@xobeysp{\leavevmode\penalty\@M\ }
%    \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\verbatim@line}
% \changes{v1.2d}{1989/11/29}{Introduced token register
%                \cs{verbatim@line}.}
%    We use a newly defined token register called |\verbatim@line|
%    that will be used as the character buffer.
%    \begin{macrocode}
\newtoks\verbatim@line
%    \end{macrocode}
% \end{macro}
%
% The following four macros are defined globally in a way suitable for
% the \texttt{verbatim} and \texttt{verbatim*} environments.
% \begin{macro}{\verbatim@startline}
% \begin{macro}{\verbatim@addtoline}
% \begin{macro}{\verbatim@processline}
%    |\verbatim@startline| initializes processing of a line
%    by emptying the character buffer (|\verbatim@line|).
%    \begin{macrocode}
\def\verbatim@startline{\verbatim@line{}}
%    \end{macrocode}
%    |\verbatim@addtoline| adds the tokens in its argument
%    to our buffer register |\verbatim@line| without expanding
%    them.
%    \begin{macrocode}
\def\verbatim@addtoline#1{%
  \verbatim@line\expandafter{\the\verbatim@line#1}}
%    \end{macrocode}
%    Processing a line inside a \texttt{verbatim} or \texttt{verbatim*}
%    environment means printing it.
% \changes{v1.2c}{1989/10/31}{Changed \cs{@@par} to \cs{par} in
%    \cs{verbatim@processline}.  Removed \cs{leavevmode} and \cs{null}
%    (i.e.\ the empty \cs{hbox}).}
%    Ending the line means that we have to begin a new paragraph.
%    We use |\par| for this purpose.  Note that |\par|
%    is redefined in |\@verbatim| to force \TeX{} into horizontal
%    mode and to insert an empty box so that empty lines in the input
%    do appear in the output.
% \changes{v1.2f}{1990/01/31}{\cs{verbatim@startline} removed.}
%    \begin{macrocode}
\def\verbatim@processline{\the\verbatim@line\par}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\verbatim@finish}
%    As a default, |\verbatim@finish| processes the remaining
%    characters.
%    When this macro is called we are facing the following problem:
%    when the |\end{verbatim}|
%    command is encountered |\verbatim@processline| is called
%    to process the characters preceding the command on the same
%    line.  If there are none, an empty line would be output if we
%    did not check for this case.
%
%    If the line is empty |\the\verbatim@line| expands to
%    nothing.  To test this we use a trick similar to that on p.\ 376
%    of the \TeX{}book, but with |$|\ldots|$| instead of
%    the |!| tokens.  These |$| tokens can never have the same
%    category code as a |$| token that might possibly appear in the
%    token register |\verbatim@line|, as such a token will always have
%    been read with category code $12$ (other).
%    Note that |\ifcat| expands the following tokens so that
%    |\the\verbatim@line| is replaced by the accumulated
%    characters
% \changes{v1.2d}{1989/11/29}{Changed \cs{ifx} to \cs{ifcat} test.}
% \changes{v1.1b}{1989/10/18}{Corrected bug in if test (found by CRo).}
%    \begin{macrocode}
\def\verbatim@finish{\ifcat$\the\verbatim@line$\else
  \verbatim@processline\fi}
%    \end{macrocode}
% \end{macro}
%
%
% \subsection{The \texttt{verbatim} and \texttt{verbatim*} environments}
%
% \begin{macro}{\verbatim@font}
% \changes{v1.2f}{1990/01/31}{\cs{@lquote} macro removed.}
% \changes{v1.1b}{1989/10/18}{\cs{@noligs} removed.  Code inserted
%                           directly into \cs{verbatim@font}.}
% \changes{v1.1a}{1989/10/16}{\cs{verbatim@font} added.}
% \changes{v1.1a}{1989/10/16}{\cs{@noligs} added.}
% \changes{v1.1a}{1989/10/16}{\cs{@lquote} added.}
%    We start by defining the macro |\verbatim@font| that is
%    to select the font and to set font-dependent parameters.
%    Then we go through |\verbatim@nolig@list| to avoid
%    certain ligatures.
%    |\verbatim@nolig@list| is macro defined in the \LaTeXe{} kernel
%    to expand to
%    \begin{verbatim}
%    \do\`\do\<\do\>\do\,\do\'\do\-
%\end{verbatim}
%    All the characters in this list can be part of a ligature in some
%    font or other.
% \changes{v1.2f}{1990/01/31}{\cs{@lquote} macro removed.}
% \changes{v1.4c}{1990/10/18}{Added \cs{leavevmode}.}
% \changes{v1.4k}{1992/07/13}{Replaced Blank after $96$ by \cs{relax}.
%                           (Proposed by Dan Dill.)}
% \changes{v1.5}{1993/10/11}{Definition changed according to new code
%          in latex.tex and to avoid global definition.}
% \changes{v1.5c}{1994/02/07}{Changed to use new font switching
%                           commands.}
%    \begin{macrocode}
\def\verbatim@font{\normalfont\ttfamily
                   \let\do\do@noligs
                   \verbatim@nolig@list}
%    \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\@verbatim}
% \changes{v1.1a}{1989/10/16}{\cs{@verbatim} added.}
%    The macro |\@verbatim| sets up things properly.
%    First of all, the tokens of the |\every@verbatim| hook
%    are inserted.
%    Then a \texttt{trivlist} environment is started and its first
%    |\item| command inserted.
%    Each line of the \texttt{verbatim} or \texttt{verbatim*}
%    environment will be treated as a separate paragraph.
% \changes{v1.2e}{1990/01/15}{Added \cs{every@verbatim} hook.}
% \changes{v1.5b}{1994/01/24}{Removed optional argument of \cs{item}.}
%    \begin{macrocode}
\def\@verbatim{\the\every@verbatim
  \trivlist \item \relax
%    \end{macrocode}
%    The |@inlabel| switch is set to false to avoid insertion of
%    an extra penalty via |\everypar|. Such a penalty might cause
%    breaking of the
%    first verbatim line if its length exceeds the current |\hsize|.
% \changes{v1.5b}{1994/01/24}{Set \texttt{@inlabel} switch to false.}
%    \begin{macrocode}
  \global\@inlabelfalse
%    \end{macrocode}
% \changes{v1.3c}{1990/02/26}{Removed extra vertical space.
%           Suggested by Frank Mittelbach.}
% \changes{v1.4k}{1992/07/13}{Added setting for
%        \cs{@beginparpenalty}. Suggested by Frank Mittelbach.}
%    The paragraph parameters are set appropriately:
%    the penalty at the beginning of the environment,
%    left and right margins, paragraph indentation, the glue to
%    fill the last line, and the vertical space between paragraphs.
%    The latter space has to be zero since we do not want to add
%    extra space between lines.
%    \begin{macrocode}
  \@beginparpenalty \predisplaypenalty 
  \leftskip\@totalleftmargin\rightskip\z@
  \parindent\z@\parfillskip\@flushglue\parskip\z@
%    \end{macrocode}
% \changes{v1.1b}{1989/10/18}{Added resetting of \cs{parshape}
%                           if at beginning of a list.
%                           (Problem pointed out by Chris Rowley.)}
%    There's one point to make here:
%    the \texttt{list} environment uses \TeX's |\parshape|
%    primitive to get a special indentation for the first line
%    of the  list.
%    If the list begins with a \texttt{verbatim} environment
%    this |\parshape| is still in effect.
%    Therefore we have to reset this internal parameter explicitly.
%    We could do this by assigning $0$ to |\parshape|.
%    However, there is a simpler way to achieve this:
%    we simply tell \TeX{} to start a new paragraph.
%    As is explained on p.~103 of the \TeX{}book, this resets
%    |\parshape| to zero.
% \changes{v1.1c}{1989/10/19}{Replaced explicit resetting of
%                           \cs{parshape} by \cs{@@par}.}
%    \begin{macrocode}
  \@@par
%    \end{macrocode}
%    We now ensure that |\par| has the correct definition,
%    namely to force \TeX{} into horizontal mode
%    and to include an empty box.
%    This is to ensure that empty lines do appear in the output.
%    Afterwards, we insert the |\interlinepenalty| since \TeX{}
%    does not add a penalty between paragraphs (here: lines)
%    by its own initiative. Otherwise a |verbatim| environment
%    could be broken across pages even if a |\samepage|
%    declaration were present.
%
%    However, in a top-aligned minipage, this will result in an extra
%    empty line added at the top. Therefore, a slightly more
%    complicated construct is necessary.
% \changes{v1.2c}{1989/10/31}{Definition of \cs{par} added.
%                           Ensures identical behaviour for
%                           verbatim and \cs{verbatiminput}.
%                           Problem pointed out by Chris.}
% \changes{v1.4d}{1991/04/24}{\cs{penalty}\cs{interlinepenalty} added.
%                           Necessary to avoid page breaks in
%                           the scope of a \cs{samepage} declaration.}
% \changes{v1.5b}{1994/01/24}{Improved definition of \cs{par} to work
%                           under all circumstances.}
%    \begin{macrocode}
  \def\par{%
    \if@tempswa
      \null\@@par\penalty\interlinepenalty
    \else
      \@tempswatrue
      \ifhmode\@@par\penalty\interlinepenalty\fi
    \fi}%
%    \end{macrocode}
%    But to avoid an error message when the environment
%    doesn't contain any text, we redefine |\@noitemerr|
%    which will in this case be called by |\endtrivlist|.
% \changes{v1.4j}{1992/06/30}{Introduced warning instead of error
%        for empty body of verbatim text.
%        Suggested by Nelson Beebe.}
%    \begin{macrocode}
  \def\@noitemerr{\@warning{No verbatim text}}%
%    \end{macrocode}
%    Now we call |\obeylines| to make the end of line character
%    active,
%    \begin{macrocode}
  \obeylines
%    \end{macrocode}
%    switch to the font to be used,
%    \begin{macrocode}
  \verbatim@font
%    \end{macrocode}
%    and change the category code of all special characters
%    to $12$ (other).
%    \begin{macrocode}
  \let\do\@makeother \dospecials}
%    \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\verbatim}
% \begin{macro}{\verbatim*}
%    Now we define the toplevel macros.
%    |\verbatim| is slightly changed:
%    after setting up things properly it calls
%    |\verbatim@start|.
%    \begin{macrocode}
\def\verbatim{\@verbatim \frenchspacing\@vobeyspaces\verbatim@start}
%    \end{macrocode}
%    |\verbatim*| is defined accordingly.
%    \begin{macrocode}
\@namedef{verbatim*}{\@verbatim\verbatim@start}
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\endverbatim}
% \begin{macro}{\endverbatim*}
%    To end the \texttt{verbatim} and \texttt{verbatim*}
%    environments it is only necessary to finish the
%    \texttt{trivlist} environment started in |\@verbatim|.
%    \begin{macrocode}
\let\endverbatim=\endtrivlist
\expandafter\let\csname endverbatim*\endcsname =\endtrivlist
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
%
% \subsection{The \texttt{comment} environment}
%
% \begin{macro}{\comment}
% \begin{macro}{\endcomment}
% \changes{v1.1c}{1989/10/19}{Added \cs{@bsphack}/\cs{@esphack} to the
%            \texttt{comment} environment.  Suggested by Chris Rowley.}
%    The |\comment| macro is similar to |\verbatim*|.
%    However, we do not need to switch fonts or set special
%    formatting parameters such as |\parindent| or |\parskip|.
%    We need only set the category code of all special characters
%    to $12$ (other) and that of |^^M| (the end of line character)
%    to $13$ (active).
%    The latter is needed for macro parameter delimiter matching in
%    the internal macros defined below.
%    In contrast to the default definitions used by the
%    |\verbatim| and |\verbatim*| macros,
%    we define |\verbatim@addtoline| to throw away its argument
%    and |\verbatim@processline|, |\verbatim@startline|,
%    and |\verbatim@finish| to act as no-ops.
%    Then we call |\verbatim@|.
%    But the first thing we do is to call |\@bsphack| so that
%    this environment has no influence whatsoever upon the spacing.
% \changes{v1.1c}{1989/10/19}{Changed \cs{verbatim@start} to
%                           \cs{verbatim@}.  Suggested by Chris Rowley.}
% \changes{v1.1c}{1989/10/19}{\cs{verbatim@startline} and
%                           \cs{verbatim@finish} are now
%                           also redefined to do nothing.}
%    \begin{macrocode}
\def\comment{\@bsphack
             \let\do\@makeother\dospecials\catcode`\^^M\active
             \let\verbatim@startline\relax
             \let\verbatim@addtoline\@gobble
             \let\verbatim@processline\relax
             \let\verbatim@finish\relax
             \verbatim@}
%    \end{macrocode}
%    |\endcomment| is very simple: it only calls
%    |\@esphack| to take care of the spacing.
%    The |\end| macro closes the group and therefore takes care
%    of restoring everything we changed.
%    \begin{macrocode}
\let\endcomment=\@esphack
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
%
%
% \subsection{The main loop}
%
% Here comes the tricky part:
% During the definition of the macros we need to use the special
% characters |\|, |{|, and |}| not only with their
% normal category codes,
% but also with category code $12$ (other).
% We achieve this by the following trick:
% first we tell \TeX{} that |\|, |{|, and |}|
% are the lowercase versions of |!|, |[|, and |]|.
% Then we replace every occurrence of |\|, |{|, and |}|
% that should be read with category code $12$ by |!|, |[|,
% and |]|, respectively,
% and give the whole list of tokens to |\lowercase|,
% knowing that category codes are not altered by this primitive!
%
% But first we have ensure that
% |!|, |[|, and |]| themselves have
% the correct category code!
% \changes{v1.3b}{1990/02/07}{Introduced \cs{vrb@catcodes} instead
%                  of explicit setting of category codes.}
% To allow special settings of these codes we hide their setting in
% the macro |\vrb@catcodes|.  If it is already defined our new
% definition is skipped.
%    \begin{macrocode}
\@ifundefined{vrb@catcodes}%
  {\def\vrb@catcodes{%
     \catcode`\!12\catcode`\[12\catcode`\]12}}{}
%    \end{macrocode}
% This tricks allows us to use this code for applications where other
% category codes are in effect.
%
% We start a group to keep the category code changes local.
%    \begin{macrocode}
\begingroup
 \vrb@catcodes
 \lccode`\!=`\\ \lccode`\[=`\{ \lccode`\]=`\}
%    \end{macrocode}
% \changes{v1.2f}{1990/01/31}{Code for TABs removed.}
%    We also need the end-of-line character |^^M|,
%    as an active character.
%    If we were to simply write |\catcode`\^^M=\active|
%    then we would get an unwanted active end of line character
%    at the end of every line of the following macro definitions.
%    Therefore we use the same trick as above:
%    we write a tilde |~| instead of |^^M| and
%    pretend that the
%    latter is the lowercase variant of the former.
%    Thus we have to ensure now that the tilde character has
%    category code $13$ (active).
%    \begin{macrocode}
 \catcode`\~=\active \lccode`\~=`\^^M
%    \end{macrocode}
%    The use of the |\lowercase| primitive leads to one problem:
%    the uppercase character `|C|' needs to be used in the
%    code below and its case must be preserved.
%    So we add the command:
%    \begin{macrocode}
 \lccode`\C=`\C
%    \end{macrocode}
%    Now we start the token list passed to |\lowercase|.
%    We use the following little trick (proposed by Bernd Raichle):
%    The very first token in the token list we give to |\lowercase| is
%    the |\endgroup| primitive. This means that it is processed by
%    \TeX{} immediately after |\lowercase| has finished its operation,
%    thus ending the group started by |\begingroup| above. This avoids
%    the global definition of all macros.
%    \begin{macrocode}
 \lowercase{\endgroup
%    \end{macrocode}
% \begin{macro}{\verbatim@start}
%    The purpose of |\verbatim@start| is to check whether there
%    are any characters on the same line as the |\begin{verbatim}|
%    and to pretend that they were on a line by themselves.
%    On the other hand, if there are no characters remaining
%    on the current line we shall just find an end of line character.
%    |\verbatim@start| performs its task by first grabbing the
%    following character (its argument).
%    This argument is then compared to an active |^^M|,
%    the end of line character.
%    \begin{macrocode}
    \def\verbatim@start#1{%
      \verbatim@startline
      \if\noexpand#1\noexpand~%
%    \end{macrocode}
%    If this is true we transfer control to |\verbatim@|
%    to process the next line.  We use
%    |\next| as the macro which will continue the work.
%    \begin{macrocode}
        \let\next\verbatim@
%    \end{macrocode}
%    Otherwise, we define |\next| to expand to a call
%    to |\verbatim@| followed by the character just
%    read so that it is reinserted into the text.
%    This means that those characters remaining on this line
%    are handled as if they formed a line by themselves.
%    \begin{macrocode}
      \else \def\next{\verbatim@#1}\fi
%    \end{macrocode}
%    Finally we call |\next|.
%    \begin{macrocode}
      \next}%
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\verbatim@}
%    The three macros |\verbatim@|, |\verbatim@@|,
%    and |\verbatim@@@| form the ``main loop'' of the
%    \texttt{verbatim} environment.
%    The purpose of |\verbatim@| is to read exactly one line
%    of input.
%    |\verbatim@@| and |\verbatim@@@| work together to
%    find out whether the four characters
%    |\end| (all with category code $12$ (other)) occur in that
%    line.
%    If so, |\verbatim@@@| will call
%    |\verbatim@test| to check whether this |\end| is
%    part of |\end{verbatim}| and will terminate the environment
%    if this is the case.
%    Otherwise we continue as if nothing had happened.
%    So let's have a look at the definition of |\verbatim@|:
% \changes{v1.1a}{1989/10/16}{Replaced \cs{verbatim@@@} by \cs{@nil}.}
%    \begin{macrocode}
    \def\verbatim@#1~{\verbatim@@#1!end\@nil}%
%    \end{macrocode}
%    Note that the |!| character will have been replaced by a
%    |\| with category code $12$ (other) by the |\lowercase|
%    primitive governing this code before the definition of this
%    macro actually takes place.
%    That means that
%    it takes the line, puts |\end| (four character tokens)
%    and |\@nil| (one control sequence token) as a
%    delimiter behind it, and
%    then calls |\verbatim@@|.
% \end{macro}
%
% \begin{macro}{\verbatim@@}
%    |\verbatim@@| takes everything up to the next occurrence of
%    the four characters |\end| as its argument.
%    \begin{macrocode}
    \def\verbatim@@#1!end{%
%    \end{macrocode}
%    That means: if they do not occur in the original line, then
%    argument |#1| is the
%    whole input line, and |\@nil| is the next token
%    to be processed.
%    However, if the four characters |\end| are part of the
%    original line, then
%    |#1| consists of the characters in front of |\end|,
%    and the next token is the following character (always remember
%    that the line was lengthened by five tokens).
%    Whatever |#1| may be, it is verbatim text,
%    so |#1| is added to the line currently built.
%    \begin{macrocode}
       \verbatim@addtoline{#1}%
%    \end{macrocode}
%    The next token in the input stream
%    is of special interest to us.
%    Therefore |\futurelet| defines |\next| to be equal
%    to it before calling |\verbatim@@@|.
%    \begin{macrocode}
       \futurelet\next\verbatim@@@}%
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\verbatim@@@}
% \changes{v1.1a}{1989/10/16}{Replaced \cs{verbatim@@@} by
%                           \cs{@nil} where used as delimiter.}
%    |\verbatim@@@| will now read the rest of the tokens on
%    the current line,
%    up to the final |\@nil| token.
%    \begin{macrocode}
    \def\verbatim@@@#1\@nil{%
%    \end{macrocode}
%    If the first of the above two cases occurred, i.e.\ no
%    |\end| characters were on that line, |#1| is empty
%    and |\next| is equal to |\@nil|.
%    This is easily checked.
%    \begin{macrocode}
       \ifx\next\@nil
%    \end{macrocode}
%    If so, this was a simple line.
%    We finish it by processing the line we accumulated so far.
%    Then we prepare to read the next line.
% \changes{v1.2f}{1990/01/31}{Added \cs{verbatim@startline}.}
%    \begin{macrocode}
         \verbatim@processline
         \verbatim@startline
         \let\next\verbatim@
%    \end{macrocode}
%    Otherwise we have to check what follows these |\end|
%    tokens.
%    \begin{macrocode}
       \else
%    \end{macrocode}
%    Before we continue, it's a good idea to stop for a moment
%    and remember where we are:
%    We have just read the four character tokens |\end|
%    and must now check whether the name of the environment (surrounded
%    by braces) follows.
%    To this end we define a macro called |\@tempa|
%    that reads exactly one character and decides what to do next.
%    This macro should do the following: skip spaces until
%    it encounters either a left brace or the end of the line.
%    But it is important to remember which characters are skipped.
%    The |\end|\meta{optional spaces}|{| characters
%    may be part of the verbatim text, i.e.\ these characters
%    must be printed.
%
%    Assume for example that the current line contains
%    \begin{verbatim*}
%      \end {AVeryLongEnvironmentName}
%\end{verbatim*}
%    As we shall soon see, the scanning mechanism implemented here
%    will not find out that this is text to be printed until
%    it has read the right brace.
%    Therefore we need a way to accumulate the characters read
%    so that we can reinsert them if necessary.
%    The token register |\@temptokena| is used for this purpose.
%
%    Before we do this we have to get rid of the superfluous
%    |\end| tokens at the end of the line.
% \changes{v1.4j}{1992/06/30}{Removed use of \cs{toks@}. Suggested by
%           Bernd Raichle.}
%    To this end we define a temporary macro whose argument
%    is delimited by |\end\@nil| (four character tokens
%    and one control sequence token) to be used below
%    on the rest of the line, after appending a |\@nil| token to it.
%    (Note that this token can never appear in |#1|.)
%    We use the following definition of
%    |\@tempa| to get the rest of the line (after the first
%    |\end|).
%    \begin{macrocode}
         \def\@tempa##1!end\@nil{##1}%
%    \end{macrocode}
%    We mentioned already that we use token register
%    |\@temptokena|
%    to remember the characters we skip, in case we need them again.
%    We initialize this with the |\end| we have thrown away
%    in the call to |\@tempa|.
%    \begin{macrocode}
         \@temptokena{!end}%
%    \end{macrocode}
%    We shall now call |\verbatim@test|
%    to process the characters
%    remaining on the current line.
%    But wait a moment: we cannot simply call this macro
%    since we have already read the whole line.
%    Therefore we have to first expand the macro |\@tempa| to insert
%    them again after the |\verbatim@test| token.
%    A |^^M| character is appended to denote the end of the line.
%    (Remember that this character comes disguised as a tilde.)
% \changes{v1.2}{1989/10/20}{Taken local definition of \cs{@tempa} out
%                          of \cs{verbatim@@@} and introduced
%                          \cs{verbatim@test} instead.}
%    \begin{macrocode}
         \def\next{\expandafter\verbatim@test\@tempa#1\@nil~}%
%    \end{macrocode}
%    That's almost all, but we still have to
%    now call |\next| to do the work.
%    \begin{macrocode}
       \fi \next}%
%    \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\verbatim@test}
% \changes{v1.2}{1989/10/20}{Introduced \cs{verbatim@test}.}
%    We define |\verbatim@test| to investigate every token
%    in turn.
%    \begin{macrocode}
    \def\verbatim@test#1{%
%    \end{macrocode}
%    First of all we set |\next| equal to |\verbatim@test|
%    in case this macro must call itself recursively in order to
%    skip spaces.
%    \begin{macrocode}
           \let\next\verbatim@test
%    \end{macrocode}
%    We have to distinguish four cases:
%    \begin{enumerate}
%      \item The next token is a |^^M|, i.e.\ we reached
%            the end of the line.  That means that nothing
%            special was found.
%            Note that we use |\if| for the following
%            comparisons so that the category code of the
%            characters is irrelevant.
%    \begin{macrocode}
           \if\noexpand#1\noexpand~%
%    \end{macrocode}
%            We add the characters accumulated in token register
%            |\@temptokena| to the current line.  Since
%            |\verbatim@addtoline| does not expand its argument,
%            we have to do the expansion at this point.  Then we
%            |\let| |\next| equal to |\verbatim@|
%            to prepare to read the next line.
% \changes{v1.2f}{1990/01/31}{Added \cs{verbatim@startline}.}
%    \begin{macrocode}
             \expandafter\verbatim@addtoline
               \expandafter{\the\@temptokena}%
             \verbatim@processline
             \verbatim@startline
             \let\next\verbatim@
%    \end{macrocode}
%      \item A space character follows.
%            This is allowed, so we add it to |\@temptokena|
%            and continue.
%    \begin{macrocode}
           \else \if\noexpand#1
             \@temptokena\expandafter{\the\@temptokena#1}%
%    \end{macrocode}
% \changes{v1.2f}{1990/01/31}{Code for TABs removed.}
%      \item An open brace follows.
%            This is the most interesting case.
%            We must now collect characters until we read the closing
%            brace and check whether they form the environment name.
%            This will be done by |\verbatim@testend|, so here
%            we let |\next| equal this macro.
%            Again we will process the rest of the line, character
%            by character.
% \changes{v1.2}{1989/10/20}{Moved the initialization of
%                          \cs{@tempc} from \cs{verbatim@testend} into
%                          \cs{verbatim@test}.}
%            The characters forming the name of the environment will
%            be accumulated in |\@tempc|.
%            We initialize this macro to expand to nothing.
% \changes{v1.3b}{1990/02/07}{\cs{noexpand} added.}
%    \begin{macrocode}
           \else \if\noexpand#1\noexpand[%
             \let\@tempc\@empty
             \let\next\verbatim@testend
%    \end{macrocode}
%            Note that the |[| character will be a |{| when
%            this macro is defined.
%      \item Any other character means that the |\end| was part
%            of the verbatim text.
%            Add the characters to the current line and prepare to call
%            |\verbatim@| to process the rest of the line.
%  \changes{v1.0f}{1989/10/09}{Fixed \cs{end} \cs{end} bug
%                            found by Chris Rowley}
%    \begin{macrocode}
           \else
             \expandafter\verbatim@addtoline
               \expandafter{\the\@temptokena}%
             \def\next{\verbatim@#1}%
           \fi\fi\fi
%    \end{macrocode}
%    \end{enumerate}
%    The last thing this macro does is to call |\next|
%    to continue processing.
%    \begin{macrocode}
           \next}%
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\verbatim@testend}
%    |\verbatim@testend| is called when
%    |\end|\meta{optional spaces}|{| was seen.
%    Its task is to scan everything up to the next |}|
%    and to call |\verbatim@@testend|.
%    If no |}| is found it must reinsert the characters it read
%    and return to |\verbatim@|.
%    The following definition is similar to that of
%    |\verbatim@test|:
%    it takes the next character and decides what to do.
% \changes{v1.2}{1989/10/20}{Removed local definition of \cs{@tempa}
%                          from \cs{verbatim@testend} which now
%                          does the work itself.}
%    \begin{macrocode}
    \def\verbatim@testend#1{%
%    \end{macrocode}
%    Again, we have four cases:
%    \begin{enumerate}
%      \item |^^M|: As no |}| is found in the current line,
%            add the characters to the buffer.  To avoid a
%            complicated construction for expanding
%            |\@temptokena|
%            and |\@tempc| we do it in two steps.  Then we
%            continue with |\verbatim@| to process the
%            next line.
% \changes{v1.2f}{1990/01/31}{Added \cs{verbatim@startline}.}
%    \begin{macrocode}
         \if\noexpand#1\noexpand~%
           \expandafter\verbatim@addtoline
             \expandafter{\the\@temptokena[}%
           \expandafter\verbatim@addtoline
             \expandafter{\@tempc}%
           \verbatim@processline
           \verbatim@startline
           \let\next\verbatim@
%    \end{macrocode}
%      \item |}|: Call |\verbatim@@testend| to check
%            if this is the right environment name.
% \changes{v1.3b}{1990/02/07}{\cs{noexpand} added.}
%    \begin{macrocode}
         \else\if\noexpand#1\noexpand]%
           \let\next\verbatim@@testend
%    \end{macrocode}
%  \changes{v1.0f}{1989/10/09}{Introduced check for
%              {\tt\string\verb!\string|!\string\!\string|} to fix
%              single brace bug found by Chris Rowley}
%      \item |\|: This character must not occur in the name of
%            an environment.  Thus we stop collecting characters.
%            In principle, the same argument would apply to other
%            characters as well, e.g., |{|.
%            However, |\| is a special case, since it may be
%            the first character of |\end|.  This means that
%            we have to look again for
%            |\end{|\meta{environment name}|}|.
%            Note that we prefixed the |!| by a |\noexpand|
%            primitive, to protect ourselves against it being an
%            active character.
% \changes{v1.3b}{1990/02/07}{\cs{noexpand} added.}
%    \begin{macrocode}
         \else\if\noexpand#1\noexpand!%
           \expandafter\verbatim@addtoline
             \expandafter{\the\@temptokena[}%
           \expandafter\verbatim@addtoline
             \expandafter{\@tempc}%
           \def\next{\verbatim@!}%
%    \end{macrocode}
%      \item Any other character: collect it and continue.
%            We cannot use |\edef| to define |\@tempc|
%            since its replacement text might contain active
%            character tokens.
%    \begin{macrocode}
         \else \expandafter\def\expandafter\@tempc\expandafter
           {\@tempc#1}\fi\fi\fi
%    \end{macrocode}
%    \end{enumerate}
%    As before, the macro ends by calling itself, to
%    process the next character if appropriate.
%    \begin{macrocode}
         \next}%
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\verbatim@@testend}
%    Unlike the previous macros |\verbatim@@testend| is simple:
%    it has only to check if the |\end{|\ldots|}|
%    matches the corresponding |\begin{|\ldots|}|.
%    \begin{macrocode}
    \def\verbatim@@testend{%
%    \end{macrocode}
%    We use |\next| again to define the things that are
%    to be done.
%    Remember that the name of the current environment is
%    held in |\@currenvir|, the characters accumulated
%    by |\verbatim@testend| are in |\@tempc|.
%    So we simply compare these and prepare to execute
%    |\end{|\meta{current environment}|}|
%    macro if they match.
%    Before we do this we call |\verbatim@finish| to process
%    the last line.
%    We define |\next| via |\edef| so that
%    |\@currenvir| is replaced by its expansion.
%    Therefore we need |\noexpand| to inhibit the expansion
%    of |\end| at this point.
%    \begin{macrocode}
       \ifx\@tempc\@currenvir
         \verbatim@finish
         \edef\next{\noexpand\end{\@currenvir}%
%    \end{macrocode}
%    Without this trick the |\end| command would not be able
%    to correctly check whether its argument matches the name of
%    the current environment and you'd get an
%    interesting \LaTeX{} error message such as:
%    \begin{verbatim}
%! \begin{verbatim*} ended by \end{verbatim*}.
%\end{verbatim}
%    But what do we do with the rest of the characters, those
%    that remain on that line?
%    We call |\verbatim@rescan| to take care of that.
%    Its first argument is the name of the environment just
%    ended, in case we need it again.
%    |\verbatim@rescan| takes the list of characters to be
%    reprocessed as its second argument.
%    (This token list was inserted after the current macro
%    by |\verbatim@@@|.)
%    Since we are still in an |\edef| we protect it
%    by means of|\noexpand|.
%    \begin{macrocode}
                    \noexpand\verbatim@rescan{\@currenvir}}%
%    \end{macrocode}
%    If the names do not match, we reinsert everything read up
%    to now and prepare to call |\verbatim@| to process
%    the rest of the line.
%    \begin{macrocode}
       \else
         \expandafter\verbatim@addtoline
           \expandafter{\the\@temptokena[}%
           \expandafter\verbatim@addtoline
             \expandafter{\@tempc]}%
         \let\next\verbatim@
       \fi
%    \end{macrocode}
%    Finally we call |\next|.
%    \begin{macrocode}
       \next}%
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\verbatim@rescan}
%    In principle |\verbatim@rescan| could be used to
%    analyse the characters remaining after the |\end{...}|
%    command and pretend that these were read
%    ``properly'', assuming ``standard'' category codes are in
%    force.\footnote{Remember that they were all read with
%          category codes $11$ (letter) and $12$ (other) so
%          that control sequences are not recognized as such.}
%    But this is not always possible (when there are unmatched
%    curly braces in the rest of the line).
%    Besides, we think that this is not worth the effort:
%    After a \texttt{verbatim} or \texttt{verbatim*} environment
%    a new line in the output is begun anyway,
%    and an |\end{comment}| can easily be put on a line by itself.
%    So there is no reason why there should be any text here.
%    For the benefit of the user who did put something there
%    (a comment, perhaps)
%    we simply issue a warning and drop them.
%    The method of testing is explained in Appendix~D, p.\ 376 of
%    the \TeX{}book. We use |^^M| instead of the |!|
%    character used there
%    since this is a character that cannot appear in |#1|.
%    The two |\noexpand| primitives are necessary to avoid
%    expansion of active characters and macros.
%
%    One extra subtlety should be noted here: remember that
%    the token list we are currently building will first be
%    processed by the |\lowercase| primitive before \TeX{}
%    carries out the definitions.
%    This means that the `|C|' character in the
%    argument to the |\@warning| macro must be protected against
%    being changed to `|c|'.  That's the reason why we added the
%    |\lccode`\C=`\C| assignment above.
%    We can now finish the argument to |\lowercase| as well as the
%    group in which the category codes were changed.
%    \begin{macrocode}
    \def\verbatim@rescan#1#2~{\if\noexpand~\noexpand#2~\else
        \@warning{Characters dropped after `\string\end{#1}'}\fi}}
%    \end{macrocode}
% \end{macro}
%
%
% \subsection{The {\tt\bslash verbatiminput} command}
%
% \begin{macro}{\verbatim@in@stream}
%    We begin by allocating an input stream (out of the 16 available
%    input streams).
%\iffalse
%  Vorstellbar ist auch der Aufruf von |`verbatiminput| innerhalb eines
%  |`verbatiminput| (z.B: wenn man |`input|-Anweisungen im zu lesenden
%  File hat und auch diese Files automatisch lesen will).  Dies kann
%  man jedoch nur ermoeglichen, wenn man einen besseren Mechanismus
%  verwendet als es das simple, statische |`newread| darstellt.
%  Vorstellbar fuer eine neuere \LaTeX-Version ist eine (lokale)
%  Allokation des Streams durch ein |`open| und eine Freigabe des
%  Streams durch |`close| oder Verlassen der Gruppe.
%\fi
%    \begin{macrocode}
\newread\verbatim@in@stream
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\verbatim@readfile}
%    The macro |\verbatim@readfile| encloses the main loop by calls to
%    the macros |\verbatim@startline| and |\verbatim@finish|,
%    respectively.  This makes sure
%    that the user can initialize and finish the command when the file
%    is empty or doesn't exist.  The \texttt{verbatim} environment has a
%    similar behaviour when called with an empty text.
%    \begin{macrocode}
\def\verbatim@readfile#1{%
  \verbatim@startline
%    \end{macrocode}
%    When the file is not found we issue a warning.
%    \begin{macrocode}
  \openin\verbatim@in@stream #1\relax
  \ifeof\verbatim@in@stream
    \typeout{No file #1.}%
  \else
%    \end{macrocode}
%    While reading from the file it is useful to switch off the
%    recognition of the end-of-line character.  This saves us stripping
%    off spaces from the contents of the line.
%    \begin{macrocode}
    \expandafter\endlinechar\expandafter\m@ne
    \expandafter\verbatim@read@file
    \expandafter\endlinechar\the\endlinechar\relax
    \closein\verbatim@in@stream
  \fi
  \verbatim@finish
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\verbatim@read@file}
%    All the work is done in |\verbatim@read@file|.  It reads the input
%    file line by line and recursively calls itself until the end of
%    the file.
%    \begin{macrocode}
\def\verbatim@read@file{%
  \read\verbatim@in@stream to\next
  \ifeof\verbatim@in@stream
  \else
%    \end{macrocode}
%    For each line we call |\verbatim@addtoline| with the contents of
%    the line. \hskip0pt plus 3cm\penalty0\hskip0pt plus -3cm
%    |\verbatim@processline| is called next.
%    \begin{macrocode}
    \expandafter\verbatim@addtoline\expandafter{\next}%
    \verbatim@processline
%    \end{macrocode}
%    After processing the line we call |\verbatim@startline| to
%    initialize all before we read the next line.
%    \begin{macrocode}
    \verbatim@startline
%    \end{macrocode}
%    Without |\expandafter| each call of |\verbatim@read@file| uses
%    space in \TeX's input stack.\footnote{A standard \TeX\ would
%    report an overflow error if you try to read a file with more than
%    ca.\ 200~lines.  The same error occurs if the first line of code
%    in \S 390 of \textsl{``TeX: The Program''\/} is missing.}
%    \begin{macrocode}
    \expandafter\verbatim@read@file
  \fi
}
%    \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\verbatiminput}
%    |\verbatiminput| first starts a group to keep font and category
%    changes local.
%    Then it calls the macro |\verbatim@input| with additional
%    arguments, depending on whether an asterisk follows.
%    \begin{macrocode}
\def\verbatiminput{\begingroup
  \@ifstar{\verbatim@input\relax}%
          {\verbatim@input{\frenchspacing\@vobeyspaces}}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\verbatim@input}
%    |\verbatim@input| sets up everything as in the |\verbatim| macro.
%    \begin{macrocode}
\def\verbatim@input#1#2{\@verbatim #1\relax
%    \end{macrocode}
%    Then it reads in the file, finishes off the \texttt{trivlist}
%    environment started by |\@verbatim| and closes the group.
%    This restores everything to its normal settings.
%    \begin{macrocode}
  \verbatim@readfile{#2}\endtrivlist\endgroup\@doendpe}
%</package>
%    \end{macrocode}
% \end{macro}
%
%
% \subsection{Getting verbatim text into arguments.}
%
% One way of achieving this is to define a macro (command) whose
% expansion is the required verbatim text.  This command can then be
% used anywhere that the verbatim text is required.  It can be used in
% arguments, even moving ones, but it is fragile (at least, the
% version here is).
% 
% Here is some code which claims to provide this.  It is a much revised
% version of something I (Chris) did about 2 years ago.  Maybe it needs
% further revision.
%
% It is only intended as an extension to |\verb|, not to the
% \texttt{verbatim} environment.  It should therefore, perhaps, treat
% line-ends similarly to whatever is best for |\verb|.
%
% \begin{macro}{\newverbtext}
% This is the command to produce a new macro whose expansion is
% verbatim text.  This command itself cannot be used in arguments,
% of course! It is used as follows:
%
% \begin{verbatim}
%    \newverbtext{\myverb}"^%{ &~_\}}@ #"
% \end{verbatim}   
%    
% The rules for delimiting the verbatim text are the same as those for
% |\verb|.     
%    
%    \begin{macrocode}
%<*verbtext>
\def \newverbtext {%
  \@ifstar {\@tempswatrue \@verbtext }{\@tempswafalse \@verbtext *}%
}
%    \end{macrocode}
% \end{macro}
%    I think that a temporary switch is safe here: if not, then
%    suitable |\let|s can be used.
%    \begin{macrocode}
\def \@verbtext *#1#2{%
   \begingroup
     \let\do\do@noligs \verbatim@nolig@list
     \let\do\@makeother \dospecials
     \@vobeyspaces 
     \catcode`#2\active
     \catcode`~\active
     \lccode`\~`#2%
     \lowercase
%    \end{macrocode}
%    We use a temporary macro here and a trick so that the definition of
%    the command itself can be done inside the group and be a local
%    definition (there may be better ways to achieve this). 
%    \begin{macrocode}
     {\def \@tempa ##1~%
           {\whitespaces
%    \end{macrocode}
%    If these |\noexpand|s were |\noexpand\protect\noexpand|, would
%    this make these things robust?
%    \begin{macrocode}
            \edef #1{\noexpand \@verbtextmcheck
                     \bgroup
                     \if@tempswa
                       \noexpand \visiblespaces
                     \fi
                     \noexpand \@verbtextsetup
                     ##1%
                     \egroup}%
            }%
      \expandafter\endgroup\@tempa
}
%    \end{macrocode}
%    This sets up the correct type of group for the mode: it must not
%    be expanded at define time!
%    \begin{macrocode}
\def \@verbtextmcheck {%
   \relax\ifmmode
           \hbox
         \else
           \leavevmode 
           \null
         \fi
}                                                
%    \end{macrocode}
%    This contains other things which should not be expanded during the
%    definition.
%    \begin{macrocode}
\def \@verbtextsetup {%
   \frenchspacing
   \verbatim@font
   \verbtextstyle
}
%    \end{macrocode}
%    The command |\verbtextstyle| is a document-level hook which can be
%    used to override the predefined typographic treatment of commands
%    defined with |\newverbtext| commands.
%
%    |\visiblespaces| and |\whitespaces| are examples of possible values
%    of this hook.
%    \begin{macrocode}
\let \verbtextstyle \relax
\def \visiblespaces {\chardef \  32\relax}
\def \whitespaces {\let \ \@@space}
\let \@@space \ %
%</verbtext>
%    \end{macrocode}
%
%
% \section{Testing the implementation}
%
% For testing the implementation and for demonstration we provide
% an extra file. It can be extracted by using the conditional
% `\textsf{testdriver}'. It uses a small input file called
% `\texttt{verbtest.tst}' that is distributed separately.
% Again, we use individual `+' guards.
%    \begin{macrocode}
%<*testdriver>
\documentclass{article}

\usepackage{verbatim}

\newenvironment{myverbatim}%
   {\endgraf\noindent MYVERBATIM:\endgraf\verbatim}%
   {\endverbatim}

\makeatletter

\newenvironment{verbatimlisting}[1]%
 {\def\verbatim@startline{\input{#1}%
    \def\verbatim@startline{\verbatim@line{}}%
    \verbatim@startline}%
  \verbatim}{\endverbatim}

\newwrite\verbatim@out

\newenvironment{verbatimwrite}[1]%
 {\@bsphack
  \immediate\openout \verbatim@out #1
  \let\do\@makeother\dospecials\catcode`\^^M\active
  \def\verbatim@processline{%
    \immediate\write\verbatim@out{\the\verbatim@line}}%
  \verbatim@start}%
 {\immediate\closeout\verbatim@out\@esphack}

\makeatother

\addtolength{\textwidth}{30pt}

\begin{document}

\typeout{}
\typeout{===> Expect ``characters dropped''
         warning messages in this test! <====}
\typeout{}

Text Text Text Text Text Text Text Text Text Text Text
Text Text Text Text Text Text Text Text Text Text Text
Text Text Text Text Text Text Text Text Text Text Text
  \begin{verbatim}
    test
    \end{verbatim*}
    test
    \end{verbatim
    test of ligatures: <`!`?`>
    \endverbatim
    test
    \end  verbatim
    test
    test of end of line:
    \end
    {verbatim}
  \end{verbatim} Further text to be typeset: $\alpha$.
Text Text Text Text Text Text Text Text Text Text Text
Text Text Text Text Text Text Text Text Text Text Text
Text Text Text Text Text Text Text Text Text Text Text
  \begin{verbatim*}
    test
    test
  \end {verbatim*}
Text Text Text Text Text Text Text Text Text Text Text
Text Text Text Text Text Text Text Text Text Text Text
Text Text Text Text Text Text Text Text Text Text Text
  \begin{verbatim*}  bla bla
    test
    test
  \end {verbatim*}
Text Text Text Text Text Text Text Text Text Text Text
Text Text Text Text Text Text Text Text Text Text Text
Text Text Text Text Text Text Text Text Text Text Text
Text Text Text Text Text Text Text Text Text Text Text

First of Chris Rowley's fiendish tests:
\begin{verbatim}
the double end test<text>
\end\end{verbatim}  or even \end \end{verbatim}
%
%not \end\ended??
%\end{verbatim}

Another of Chris' devils:
\begin{verbatim}
the single brace test<text>
\end{not the end\end{verbatim}
%
%not \end}ed??
%\end{verbatim}
Back to my own tests:
  \begin{myverbatim}
    test
    test
  \end {myverbatim} rest of line
Text Text Text Text Text Text Text Text Text Text Text
Text Text Text Text Text Text Text Text Text Text Text
Text Text Text Text Text Text Text Text Text Text Text

Test of empty verbatim:
\begin{verbatim}
\end{verbatim}
Text Text Text Text Text Text Text Text Text Text Text
Text Text Text Text Text Text Text Text Text Text Text
Text Text Text Text Text Text Text Text Text Text Text
  \begin {verbatimlisting}{verbtest.tex}
    Additonal verbatim text
      ...
  \end{verbatimlisting}
And here for listing a file:
  \verbatiminput{verbtest.tex}
And again, with explicit spaces:
  \verbatiminput*{verbtest.tex}
Text Text Text Text Text Text Text Text Text Text Text
Text Text Text Text Text Text Text Text Text Text Text
Text Text Text Text Text Text Text Text Text Text Text
  \begin{comment}
    test
    \end{verbatim*}
    test
    \end {comment
    test
    \endverbatim
    test
    \end  verbatim
    test
  \end {comment} Further text to be typeset: $\alpha$.
Text Text Text Text Text Text Text Text Text Text Text
Text Text Text Text Text Text Text Text Text Text Text
Text Text Text Text Text Text Text Text Text Text Text
  \begin{comment}  bla bla
    test
    test
  \end {comment}
Text Text Text Text Text Text Text Text Text Text Text
Text Text Text Text Text Text Text Text Text Text Text
Text Text Text Text Text Text Text Text Text Text Text
Text Text Text Text Text Text Text Text Text Text Text

\begin{verbatimwrite}{verbtest.txt}
asfa<fa<df
sdfsdfasd
asdfa<fsa
\end{verbatimwrite}

\end{document}
%</testdriver>
%    \end{macrocode}
%
% 
% \newcommand{\cs}[1]{\texttt{\bslash #1}}
% \Finale
%
\endinput
%% \CharacterTable
%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%%   Digits        \0\1\2\3\4\5\6\7\8\9
%%   Exclamation   \!     Double quote  \"     Hash (number) \#
%%   Dollar        \$     Percent       \%     Ampersand     \&
%%   Acute accent  \'     Left paren    \(     Right paren   \)
%%   Asterisk      \*     Plus          \+     Comma         \,
%%   Minus         \-     Point         \.     Solidus       \/
%%   Colon         \:     Semicolon     \;     Less than     \<
%%   Equals        \=     Greater than  \>     Question mark \?
%%   Commercial at \@     Left bracket  \[     Backslash     \\
%%   Right bracket \]     Circumflex    \^     Underscore    \_
%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%%   Right brace   \}     Tilde         \~}
%%