/* * linux/fs/msdos/file.c * * Written 1992,1993 by Werner Almesberger * * MS-DOS regular file handling primitives */ #ifdef MODULE #include #endif #include #include #include #include #include #include #include #include #include #include #include "msbuffer.h" #define MIN(a,b) (((a) < (b)) ? (a) : (b)) #define MAX(a,b) (((a) > (b)) ? (a) : (b)) #define PRINTK(x) #define Printk(x) printk x static struct file_operations msdos_file_operations = { NULL, /* lseek - default */ msdos_file_read, /* read */ msdos_file_write, /* write */ NULL, /* readdir - bad */ NULL, /* select - default */ NULL, /* ioctl - default */ generic_mmap, /* mmap */ NULL, /* no special open is needed */ NULL, /* release */ file_fsync /* fsync */ }; struct inode_operations msdos_file_inode_operations = { &msdos_file_operations, /* default file operations */ NULL, /* create */ NULL, /* lookup */ NULL, /* link */ NULL, /* unlink */ NULL, /* symlink */ NULL, /* mkdir */ NULL, /* rmdir */ NULL, /* mknod */ NULL, /* rename */ NULL, /* readlink */ NULL, /* follow_link */ msdos_bmap, /* bmap */ msdos_truncate, /* truncate */ NULL, /* permission */ NULL /* smap */ }; /* #Specification: msdos / special devices / mmap Mmapping does work because a special mmap is provide in that case. Note that it is much less efficient than the generic_mmap normally used since it allocate extra buffer. generic_mmap is used for normal device (512 bytes hardware sectors). */ static struct file_operations msdos_file_operations_1024 = { NULL, /* lseek - default */ msdos_file_read, /* read */ msdos_file_write, /* write */ NULL, /* readdir - bad */ NULL, /* select - default */ NULL, /* ioctl - default */ msdos_mmap, /* mmap */ NULL, /* no special open is needed */ NULL, /* release */ file_fsync /* fsync */ }; /* #Specification: msdos / special devices / swap file Swap file can't work on special devices with a large sector size (1024 bytes hard sector). Those devices have a weird MsDOS filesystem layout. Generally a single hardware sector may contain 2 unrelated logical sector. This mean that there is no easy way to do a mapping between disk sector of a file and virtual memory. So swap file is difficult (not available right now) on those devices. Off course, Ext2 does not have this problem. */ struct inode_operations msdos_file_inode_operations_1024 = { &msdos_file_operations_1024, /* default file operations */ NULL, /* create */ NULL, /* lookup */ NULL, /* link */ NULL, /* unlink */ NULL, /* symlink */ NULL, /* mkdir */ NULL, /* rmdir */ NULL, /* mknod */ NULL, /* rename */ NULL, /* readlink */ NULL, /* follow_link */ NULL, /* bmap */ msdos_truncate, /* truncate */ NULL, /* permission */ NULL /* smap */ }; #define MSDOS_PREFETCH 32 struct msdos_pre { int file_sector;/* Next sector to read in the prefetch table */ /* This is relative to the file, not the disk */ struct buffer_head *bhlist[MSDOS_PREFETCH]; /* All buffers needed */ int nblist; /* Number of buffers in bhlist */ int nolist; /* index in bhlist */ }; /* Order the prefetch of more sectors. */ static void msdos_prefetch ( struct inode *inode, struct msdos_pre *pre, int nb) /* How many must be prefetch at once */ { struct super_block *sb = inode->i_sb; struct buffer_head *bhreq[MSDOS_PREFETCH]; /* Buffers not */ /* already read */ int nbreq=0; /* Number of buffers in bhreq */ int i; for (i=0; ifile_sector); if (sector != 0){ struct buffer_head *bh; PRINTK (("fsector2 %d -> %d\n",pre->file_sector-1,sector)); pre->file_sector++; bh = getblk(inode->i_dev,sector,SECTOR_SIZE); if (bh == NULL) break; pre->bhlist[pre->nblist++] = bh; if (!msdos_is_uptodate(sb,bh)) bhreq[nbreq++] = bh; }else{ break; } } if (nbreq > 0) msdos_ll_rw_block (sb,READ,nbreq,bhreq); for (i=pre->nblist; ibhlist[i] = NULL; } /* Read a file into user space */ int msdos_file_read( struct inode *inode, struct file *filp, char *buf, int count) { struct super_block *sb = inode->i_sb; char *start = buf; char *end = buf + count; int i; int left_in_file; struct msdos_pre pre; if (!inode) { printk("msdos_file_read: inode = NULL\n"); return -EINVAL; } /* S_ISLNK allows for UMSDOS. Should never happen for normal MSDOS */ if (!S_ISREG(inode->i_mode) && !S_ISLNK(inode->i_mode)) { printk("msdos_file_read: mode = %07o\n",inode->i_mode); return -EINVAL; } if (filp->f_pos >= inode->i_size || count <= 0) return 0; /* Tell the buffer cache which block we expect to read in advance Since we are limited with the stack, we preread only MSDOS_PREFETCH because we have to keep the result into the local arrays pre.bhlist and bhreq. Each time we process one block in bhlist, we replace it by a new prefetch block if needed. */ PRINTK (("#### ino %ld pos %ld size %ld count %d\n",inode->i_ino,filp->f_pos,inode->i_size,count)); { /* We must prefetch complete block, so we must take in account the offset in the first block. */ int count_max = (filp->f_pos & (SECTOR_SIZE-1)) + count; int to_reada; /* How many block to read all at once */ pre.file_sector = filp->f_pos >> SECTOR_BITS; to_reada = count_max / SECTOR_SIZE; if (count_max & (SECTOR_SIZE-1)) to_reada++; if (filp->f_reada || !MSDOS_I(inode)->i_binary){ /* Doing a read ahead on ascii file make sure we always */ /* pre read enough, since we don't know how many blocks */ /* we really need */ int ahead = read_ahead[MAJOR(inode->i_dev)]; PRINTK (("to_reada %d ahead %d\n",to_reada,ahead)); if (ahead == 0) ahead = 8; to_reada += ahead; } if (to_reada > MSDOS_PREFETCH) to_reada = MSDOS_PREFETCH; pre.nblist = 0; msdos_prefetch (inode,&pre,to_reada); } pre.nolist = 0; PRINTK (("count %d ahead %d nblist %d\n",count,read_ahead[MAJOR(inode->i_dev)],pre.nblist)); while ((left_in_file = inode->i_size - filp->f_pos) > 0 && buf < end){ struct buffer_head *bh = pre.bhlist[pre.nolist]; char *data; int size,offset; if (bh == NULL) break; pre.bhlist[pre.nolist] = NULL; pre.nolist++; if (pre.nolist == MSDOS_PREFETCH/2){ memcpy (pre.bhlist,pre.bhlist+MSDOS_PREFETCH/2 ,(MSDOS_PREFETCH/2)*sizeof(pre.bhlist[0])); pre.nblist -= MSDOS_PREFETCH/2; msdos_prefetch (inode,&pre,MSDOS_PREFETCH/2); pre.nolist = 0; } PRINTK (("file_read pos %ld nblist %d %d %d\n",filp->f_pos,pre.nblist,pre.fetched,count)); wait_on_buffer(bh); if (!msdos_is_uptodate(sb,bh)){ /* read error ? */ brelse (bh); break; } offset = filp->f_pos & (SECTOR_SIZE-1); data = bh->b_data + offset; size = MIN(SECTOR_SIZE-offset,left_in_file); if (MSDOS_I(inode)->i_binary) { size = MIN(size,end-buf); memcpy_tofs(buf,data,size); buf += size; filp->f_pos += size; }else{ for (; size && buf < end; size--) { char ch = *data++; filp->f_pos++; if (ch == 26){ filp->f_pos = inode->i_size; break; }else if (ch != '\r'){ put_fs_byte(ch,buf++); } } } brelse(bh); } PRINTK (("--- %d -> %d\n",count,(int)(buf-start))); for (i=0; ii_atime = CURRENT_TIME; filp->f_reada = 1; /* Will be reset if a lseek is done */ return buf-start; } /* Write to a file either from user space */ int msdos_file_write( struct inode *inode, struct file *filp, char *buf, int count) { struct super_block *sb = inode->i_sb; int sector,offset,size,left,written; int error,carry; char *start,*to,ch; struct buffer_head *bh; int binary_mode = MSDOS_I(inode)->i_binary; if (!inode) { printk("msdos_file_write: inode = NULL\n"); return -EINVAL; } /* S_ISLNK allows for UMSDOS. Should never happen for normal MSDOS */ if (!S_ISREG(inode->i_mode) && !S_ISLNK(inode->i_mode)) { printk("msdos_file_write: mode = %07o\n",inode->i_mode); return -EINVAL; } /* * ok, append may not work when many processes are writing at the same time * but so what. That way leads to madness anyway. */ if (filp->f_flags & O_APPEND) filp->f_pos = inode->i_size; if (count <= 0) return 0; error = carry = 0; for (start = buf; count || carry; count -= size) { while (!(sector = msdos_smap(inode,filp->f_pos >> SECTOR_BITS))) if ((error = msdos_add_cluster(inode)) < 0) break; if (error) { msdos_truncate(inode); break; } offset = filp->f_pos & (SECTOR_SIZE-1); size = MIN(SECTOR_SIZE-offset,MAX(carry,count)); if (binary_mode && offset == 0 && (size == SECTOR_SIZE || filp->f_pos + size >= inode->i_size)){ /* No need to read the block first since we will */ /* completely overwrite it */ /* or at least write past the end of file */ if (!(bh = getblk(inode->i_dev,sector,SECTOR_SIZE))){ error = -EIO; break; } }else if (!(bh = bread(inode->i_dev,sector,SECTOR_SIZE))) { error = -EIO; break; } if (binary_mode) { memcpy_fromfs(bh->b_data+offset,buf,written = size); buf += size; } else { written = left = SECTOR_SIZE-offset; to = (char *) bh->b_data+(filp->f_pos & (SECTOR_SIZE-1)); if (carry) { *to++ = '\n'; left--; carry = 0; } for (size = 0; size < count && left; size++) { if ((ch = get_fs_byte(buf++)) == '\n') { *to++ = '\r'; left--; } if (!left) carry = 1; else { *to++ = ch; left--; } } written -= left; } filp->f_pos += written; if (filp->f_pos > inode->i_size) { inode->i_size = filp->f_pos; inode->i_dirt = 1; } msdos_set_uptodate(sb,bh,1); mark_buffer_dirty(bh, 0); brelse(bh); } if (start == buf) return error; inode->i_mtime = inode->i_ctime = CURRENT_TIME; MSDOS_I(inode)->i_attrs |= ATTR_ARCH; inode->i_dirt = 1; return buf-start; } void msdos_truncate(struct inode *inode) { int cluster; cluster = SECTOR_SIZE*MSDOS_SB(inode->i_sb)->cluster_size; (void) fat_free(inode,(inode->i_size+(cluster-1))/cluster); MSDOS_I(inode)->i_attrs |= ATTR_ARCH; inode->i_dirt = 1; }