/* * linux/drivers/char/keyboard.c * * Keyboard driver for Linux v0.99 using Latin-1. * * Written for linux by Johan Myreen as a translation from * the assembly version by Linus (with diacriticals added) * * Some additional features added by Christoph Niemann (ChN), March 1993 * * Loadable keymaps by Risto Kankkunen, May 1993 * * Diacriticals redone & other small changes, aeb@cwi.nl, June 1993 * Added decr/incr_console, dynamic keymaps, Unicode support, * dynamic function/string keys, led setting, Sept 1994 * */ #define KEYBOARD_IRQ 1 #include #include #include #include #include #include #include #include #include #include #include "kbd_kern.h" #include "diacr.h" #include "vt_kern.h" #define SIZE(x) (sizeof(x)/sizeof((x)[0])) #define KBD_REPORT_ERR #define KBD_REPORT_UNKN /* #define KBD_IS_FOCUS_9000 */ #ifndef KBD_DEFMODE #define KBD_DEFMODE ((1 << VC_REPEAT) | (1 << VC_META)) #endif #ifndef KBD_DEFLEDS /* * Some laptops take the 789uiojklm,. keys as number pad when NumLock * is on. This seems a good reason to start with NumLock off. */ #define KBD_DEFLEDS 0 #endif #ifndef KBD_DEFLOCK #define KBD_DEFLOCK 0 #endif /* * The default IO slowdown is doing 'inb()'s from 0x61, which should be * safe. But as that is the keyboard controller chip address, we do our * slowdowns here by doing short jumps: the keyboard controller should * be able to keep up */ #define REALLY_SLOW_IO #define SLOW_IO_BY_JUMPING #include #include extern void poke_blanked_console(void); extern void ctrl_alt_del(void); extern void reset_vc(unsigned int new_console); extern void change_console(unsigned int new_console); extern void scrollback(int); extern void scrollfront(int); extern int vc_cons_allocated(unsigned int); #ifdef __i386__ #define fake_keyboard_interrupt() __asm__ __volatile__("int $0x21") #else #define fake_keyboard_interrupt() do ; while (0) #endif unsigned char kbd_read_mask = 0x01; /* modified by psaux.c */ /* * global state includes the following, and various static variables * in this module: prev_scancode, shift_state, diacr, npadch, dead_key_next. * (last_console is now a global variable) */ /* shift state counters.. */ static unsigned char k_down[NR_SHIFT] = {0, }; /* keyboard key bitmap */ #define BITS_PER_LONG (8*sizeof(unsigned long)) static unsigned long key_down[256/BITS_PER_LONG] = { 0, }; extern int last_console; static int want_console = -1; static int dead_key_next = 0; /* * In order to retrieve the shift_state (for the mouse server), either * the variable must be global, or a new procedure must be created to * return the value. I chose the former way. */ /*static*/ int shift_state = 0; static int npadch = -1; /* -1 or number assembled on pad */ static unsigned char diacr = 0; static char rep = 0; /* flag telling character repeat */ struct kbd_struct kbd_table[MAX_NR_CONSOLES]; static struct tty_struct **ttytab; static struct kbd_struct * kbd = kbd_table; static struct tty_struct * tty = NULL; /* used only by send_data - set by keyboard_interrupt */ static volatile unsigned char reply_expected = 0; static volatile unsigned char acknowledge = 0; static volatile unsigned char resend = 0; extern void compute_shiftstate(void); typedef void (*k_hand)(unsigned char value, char up_flag); typedef void (k_handfn)(unsigned char value, char up_flag); static k_handfn do_self, do_fn, do_spec, do_pad, do_dead, do_cons, do_cur, do_shift, do_meta, do_ascii, do_lock, do_lowercase, do_ignore; static k_hand key_handler[16] = { do_self, do_fn, do_spec, do_pad, do_dead, do_cons, do_cur, do_shift, do_meta, do_ascii, do_lock, do_lowercase, do_ignore, do_ignore, do_ignore, do_ignore }; typedef void (*void_fnp)(void); typedef void (void_fn)(void); static void_fn do_null, enter, show_ptregs, send_intr, lastcons, caps_toggle, num, hold, scroll_forw, scroll_back, boot_it, caps_on, compose, SAK, decr_console, incr_console, spawn_console, bare_num; static void_fnp spec_fn_table[] = { do_null, enter, show_ptregs, show_mem, show_state, send_intr, lastcons, caps_toggle, num, hold, scroll_forw, scroll_back, boot_it, caps_on, compose, SAK, decr_console, incr_console, spawn_console, bare_num }; /* maximum values each key_handler can handle */ const int max_vals[] = { 255, SIZE(func_table) - 1, SIZE(spec_fn_table) - 1, NR_PAD - 1, NR_DEAD - 1, 255, 3, NR_SHIFT - 1, 255, NR_ASCII - 1, NR_LOCK - 1, 255 }; const int NR_TYPES = SIZE(max_vals); static void put_queue(int); static unsigned char handle_diacr(unsigned char); /* pt_regs - set by keyboard_interrupt(), used by show_ptregs() */ static struct pt_regs * pt_regs; static inline void kb_wait(void) { int i; for (i=0; i<0x100000; i++) if ((inb_p(0x64) & 0x02) == 0) return; printk("Keyboard timed out\n"); } static inline void send_cmd(unsigned char c) { kb_wait(); outb(c,0x64); } /* * Many other routines do put_queue, but I think either * they produce ASCII, or they produce some user-assigned * string, and in both cases we might assume that it is * in utf-8 already. */ void to_utf8(ushort c) { if (c < 0x80) put_queue(c); /* 0******* */ else if (c < 0x800) { put_queue(0xc0 | (c >> 6)); /* 110***** 10****** */ put_queue(0x80 | (c & 0x3f)); } else { put_queue(0xe0 | (c >> 12)); /* 1110**** 10****** 10****** */ put_queue(0x80 | ((c >> 6) & 0x3f)); put_queue(0x80 | (c & 0x3f)); } /* UTF-8 is defined for words of up to 31 bits, but we need only 16 bits here */ } /* * Translation of escaped scancodes to keycodes. * This is now user-settable. * The keycodes 1-88,96-111,119 are fairly standard, and * should probably not be changed - changing might confuse X. * X also interprets scancode 0x5d (KEY_Begin). * * For 1-88 keycode equals scancode. */ #define E0_KPENTER 96 #define E0_RCTRL 97 #define E0_KPSLASH 98 #define E0_PRSCR 99 #define E0_RALT 100 #define E0_BREAK 101 /* (control-pause) */ #define E0_HOME 102 #define E0_UP 103 #define E0_PGUP 104 #define E0_LEFT 105 #define E0_RIGHT 106 #define E0_END 107 #define E0_DOWN 108 #define E0_PGDN 109 #define E0_INS 110 #define E0_DEL 111 #define E1_PAUSE 119 /* * The keycodes below are randomly located in 89-95,112-118,120-127. * They could be thrown away (and all occurrences below replaced by 0), * but that would force many users to use the `setkeycodes' utility, where * they needed not before. It does not matter that there are duplicates, as * long as no duplication occurs for any single keyboard. */ #define SC_LIM 89 #define FOCUS_PF1 85 /* actual code! */ #define FOCUS_PF2 89 #define FOCUS_PF3 90 #define FOCUS_PF4 91 #define FOCUS_PF5 92 #define FOCUS_PF6 93 #define FOCUS_PF7 94 #define FOCUS_PF8 95 #define FOCUS_PF9 120 #define FOCUS_PF10 121 #define FOCUS_PF11 122 #define FOCUS_PF12 123 #define JAP_86 124 /* tfj@olivia.ping.dk: * The four keys are located over the numeric keypad, and are * labelled A1-A4. It's an rc930 keyboard, from * Regnecentralen/RC International, Now ICL. * Scancodes: 59, 5a, 5b, 5c. */ #define RGN1 124 #define RGN2 125 #define RGN3 126 #define RGN4 127 static unsigned char high_keys[128 - SC_LIM] = { RGN1, RGN2, RGN3, RGN4, 0, 0, 0, /* 0x59-0x5f */ 0, 0, 0, 0, 0, 0, 0, 0, /* 0x60-0x67 */ 0, 0, 0, 0, 0, FOCUS_PF11, 0, FOCUS_PF12, /* 0x68-0x6f */ 0, 0, 0, FOCUS_PF2, FOCUS_PF9, 0, 0, FOCUS_PF3, /* 0x70-0x77 */ FOCUS_PF4, FOCUS_PF5, FOCUS_PF6, FOCUS_PF7, /* 0x78-0x7b */ FOCUS_PF8, JAP_86, FOCUS_PF10, 0 /* 0x7c-0x7f */ }; /* BTC */ #define E0_MACRO 112 /* LK450 */ #define E0_F13 113 #define E0_F14 114 #define E0_HELP 115 #define E0_DO 116 #define E0_F17 117 #define E0_KPMINPLUS 118 /* * My OmniKey generates e0 4c for the "OMNI" key and the * right alt key does nada. [kkoller@nyx10.cs.du.edu] */ #define E0_OK 124 /* * New microsoft keyboard is rumoured to have * e0 5b (left window button), e0 5c (right window button), * e0 5d (menu button). [or: LBANNER, RBANNER, RMENU] * [or: Windows_L, Windows_R, TaskMan] */ #define E0_MSLW 125 #define E0_MSRW 126 #define E0_MSTM 127 static unsigned char e0_keys[128] = { 0, 0, 0, 0, 0, 0, 0, 0, /* 0x00-0x07 */ 0, 0, 0, 0, 0, 0, 0, 0, /* 0x08-0x0f */ 0, 0, 0, 0, 0, 0, 0, 0, /* 0x10-0x17 */ 0, 0, 0, 0, E0_KPENTER, E0_RCTRL, 0, 0, /* 0x18-0x1f */ 0, 0, 0, 0, 0, 0, 0, 0, /* 0x20-0x27 */ 0, 0, 0, 0, 0, 0, 0, 0, /* 0x28-0x2f */ 0, 0, 0, 0, 0, E0_KPSLASH, 0, E0_PRSCR, /* 0x30-0x37 */ E0_RALT, 0, 0, 0, 0, E0_F13, E0_F14, E0_HELP, /* 0x38-0x3f */ E0_DO, E0_F17, 0, 0, 0, 0, E0_BREAK, E0_HOME, /* 0x40-0x47 */ E0_UP, E0_PGUP, 0, E0_LEFT, E0_OK, E0_RIGHT, E0_KPMINPLUS, E0_END,/* 0x48-0x4f */ E0_DOWN, E0_PGDN, E0_INS, E0_DEL, 0, 0, 0, 0, /* 0x50-0x57 */ 0, 0, 0, E0_MSLW, E0_MSRW, E0_MSTM, 0, 0, /* 0x58-0x5f */ 0, 0, 0, 0, 0, 0, 0, 0, /* 0x60-0x67 */ 0, 0, 0, 0, 0, 0, 0, E0_MACRO, /* 0x68-0x6f */ 0, 0, 0, 0, 0, 0, 0, 0, /* 0x70-0x77 */ 0, 0, 0, 0, 0, 0, 0, 0 /* 0x78-0x7f */ }; int setkeycode(unsigned int scancode, unsigned int keycode) { if (scancode < SC_LIM || scancode > 255 || keycode > 127) return -EINVAL; if (scancode < 128) high_keys[scancode - SC_LIM] = keycode; else e0_keys[scancode - 128] = keycode; return 0; } int getkeycode(unsigned int scancode) { return (scancode < SC_LIM || scancode > 255) ? -EINVAL : (scancode < 128) ? high_keys[scancode - SC_LIM] : e0_keys[scancode - 128]; } static void keyboard_interrupt(int irq, struct pt_regs *regs) { unsigned char scancode, keycode; static unsigned int prev_scancode = 0; /* remember E0, E1 */ char up_flag; /* 0 or 0200 */ char raw_mode; pt_regs = regs; send_cmd(0xAD); /* disable keyboard */ kb_wait(); if ((inb_p(0x64) & kbd_read_mask) != 0x01) goto end_kbd_intr; scancode = inb(0x60); mark_bh(KEYBOARD_BH); if (reply_expected) { /* 0xfa, 0xfe only mean "acknowledge", "resend" for most keyboards */ /* but they are the key-up scancodes for PF6, PF10 on a FOCUS 9000 */ reply_expected = 0; if (scancode == 0xfa) { acknowledge = 1; goto end_kbd_intr; } else if (scancode == 0xfe) { resend = 1; goto end_kbd_intr; } /* strange ... */ reply_expected = 1; #if 0 printk("keyboard reply expected - got %02x\n", scancode); #endif } if (scancode == 0) { #ifdef KBD_REPORT_ERR printk("keyboard buffer overflow\n"); #endif prev_scancode = 0; goto end_kbd_intr; } tty = ttytab[fg_console]; kbd = kbd_table + fg_console; if ((raw_mode = (kbd->kbdmode == VC_RAW))) { put_queue(scancode); /* we do not return yet, because we want to maintain the key_down array, so that we have the correct values when finishing RAW mode or when changing VT's */ } if (scancode == 0xff) { /* in scancode mode 1, my ESC key generates 0xff */ /* the calculator keys on a FOCUS 9000 generate 0xff */ #ifndef KBD_IS_FOCUS_9000 #ifdef KBD_REPORT_ERR if (!raw_mode) printk("keyboard error\n"); #endif #endif prev_scancode = 0; goto end_kbd_intr; } if (scancode == 0xe0 || scancode == 0xe1) { prev_scancode = scancode; goto end_kbd_intr; } /* * Convert scancode to keycode, using prev_scancode. */ up_flag = (scancode & 0200); scancode &= 0x7f; if (prev_scancode) { /* * usually it will be 0xe0, but a Pause key generates * e1 1d 45 e1 9d c5 when pressed, and nothing when released */ if (prev_scancode != 0xe0) { if (prev_scancode == 0xe1 && scancode == 0x1d) { prev_scancode = 0x100; goto end_kbd_intr; } else if (prev_scancode == 0x100 && scancode == 0x45) { keycode = E1_PAUSE; prev_scancode = 0; } else { #ifdef KBD_REPORT_UNKN if (!raw_mode) printk("keyboard: unknown e1 escape sequence\n"); #endif prev_scancode = 0; goto end_kbd_intr; } } else { prev_scancode = 0; /* * The keyboard maintains its own internal caps lock and * num lock statuses. In caps lock mode E0 AA precedes make * code and E0 2A follows break code. In num lock mode, * E0 2A precedes make code and E0 AA follows break code. * We do our own book-keeping, so we will just ignore these. */ /* * For my keyboard there is no caps lock mode, but there are * both Shift-L and Shift-R modes. The former mode generates * E0 2A / E0 AA pairs, the latter E0 B6 / E0 36 pairs. * So, we should also ignore the latter. - aeb@cwi.nl */ if (scancode == 0x2a || scancode == 0x36) goto end_kbd_intr; if (e0_keys[scancode]) keycode = e0_keys[scancode]; else { #ifdef KBD_REPORT_UNKN if (!raw_mode) printk("keyboard: unknown scancode e0 %02x\n", scancode); #endif goto end_kbd_intr; } } } else if (scancode >= SC_LIM) { /* This happens with the FOCUS 9000 keyboard Its keys PF1..PF12 are reported to generate 55 73 77 78 79 7a 7b 7c 74 7e 6d 6f Moreover, unless repeated, they do not generate key-down events, so we have to zero up_flag below */ /* Also, Japanese 86/106 keyboards are reported to generate 0x73 and 0x7d for \ - and \ | respectively. */ /* Also, some Brazilian keyboard is reported to produce 0x73 and 0x7e for \ ? and KP-dot, respectively. */ keycode = high_keys[scancode - SC_LIM]; if (!keycode) { if (!raw_mode) { #ifdef KBD_REPORT_UNKN printk("keyboard: unrecognized scancode (%02x) - ignored\n" , scancode); #endif } goto end_kbd_intr; } } else keycode = scancode; /* * At this point the variable `keycode' contains the keycode. * Note: the keycode must not be 0. * We keep track of the up/down status of the key, and * return the keycode if in MEDIUMRAW mode. */ if (up_flag) { rep = 0; if(!clear_bit(keycode, key_down)) { /* unexpected, but this can happen: maybe this was a key release for a FOCUS 9000 PF key; if we want to see it, we have to clear up_flag */ if (keycode >= SC_LIM || keycode == 85) up_flag = 0; } } else rep = set_bit(keycode, key_down); if (raw_mode) goto end_kbd_intr; if (kbd->kbdmode == VC_MEDIUMRAW) { /* soon keycodes will require more than one byte */ put_queue(keycode + up_flag); goto end_kbd_intr; } /* * Small change in philosophy: earlier we defined repetition by * rep = keycode == prev_keycode; * prev_keycode = keycode; * but now by the fact that the depressed key was down already. * Does this ever make a difference? Yes. */ /* * Repeat a key only if the input buffers are empty or the * characters get echoed locally. This makes key repeat usable * with slow applications and under heavy loads. */ if (!rep || (vc_kbd_mode(kbd,VC_REPEAT) && tty && (L_ECHO(tty) || (tty->driver.chars_in_buffer(tty) == 0)))) { u_short keysym; u_char type; /* the XOR below used to be an OR */ int shift_final = shift_state ^ kbd->lockstate; ushort *key_map = key_maps[shift_final]; if (key_map != NULL) { keysym = key_map[keycode]; type = KTYP(keysym); if (type >= 0xf0) { type -= 0xf0; if (type == KT_LETTER) { type = KT_LATIN; if (vc_kbd_led(kbd, VC_CAPSLOCK)) { key_map = key_maps[shift_final ^ (1<kbdmode == VC_UNICODE) ? */ if (!up_flag) to_utf8(keysym); } } else { /* maybe beep? */ /* we have at least to update shift_state */ #if 1 /* how? two almost equivalent choices follow */ compute_shiftstate(); #else keysym = U(plain_map[keycode]); type = KTYP(keysym); if (type == KT_SHIFT) (*key_handler[type])(keysym & 0xff, up_flag); #endif } } end_kbd_intr: send_cmd(0xAE); /* enable keyboard */ } static void put_queue(int ch) { wake_up(&keypress_wait); if (tty) { tty_insert_flip_char(tty, ch, 0); tty_schedule_flip(tty); } } static void puts_queue(char *cp) { wake_up(&keypress_wait); if (!tty) return; while (*cp) { tty_insert_flip_char(tty, *cp, 0); cp++; } tty_schedule_flip(tty); } static void applkey(int key, char mode) { static char buf[] = { 0x1b, 'O', 0x00, 0x00 }; buf[1] = (mode ? 'O' : '['); buf[2] = key; puts_queue(buf); } static void enter(void) { put_queue(13); if (vc_kbd_mode(kbd,VC_CRLF)) put_queue(10); } static void caps_toggle(void) { if (rep) return; chg_vc_kbd_led(kbd, VC_CAPSLOCK); } static void caps_on(void) { if (rep) return; set_vc_kbd_led(kbd, VC_CAPSLOCK); } static void show_ptregs(void) { if (pt_regs) show_regs(pt_regs); } static void hold(void) { if (rep || !tty) return; /* * Note: SCROLLOCK will be set (cleared) by stop_tty (start_tty); * these routines are also activated by ^S/^Q. * (And SCROLLOCK can also be set by the ioctl KDSKBLED.) */ if (tty->stopped) start_tty(tty); else stop_tty(tty); } static void num(void) { if (vc_kbd_mode(kbd,VC_APPLIC)) applkey('P', 1); else bare_num(); } /* * Bind this to Shift-NumLock if you work in application keypad mode * but want to be able to change the NumLock flag. * Bind this to NumLock if you prefer that the NumLock key always * changes the NumLock flag. */ static void bare_num(void) { if (!rep) chg_vc_kbd_led(kbd,VC_NUMLOCK); } static void lastcons(void) { /* switch to the last used console, ChN */ want_console = last_console; } static void decr_console(void) { int i; for (i = fg_console-1; i != fg_console; i--) { if (i == -1) i = MAX_NR_CONSOLES-1; if (vc_cons_allocated(i)) break; } want_console = i; } static void incr_console(void) { int i; for (i = fg_console+1; i != fg_console; i++) { if (i == MAX_NR_CONSOLES) i = 0; if (vc_cons_allocated(i)) break; } want_console = i; } static void send_intr(void) { if (!tty) return; tty_insert_flip_char(tty, 0, TTY_BREAK); tty_schedule_flip(tty); } static void scroll_forw(void) { scrollfront(0); } static void scroll_back(void) { scrollback(0); } static void boot_it(void) { ctrl_alt_del(); } static void compose(void) { dead_key_next = 1; } int spawnpid, spawnsig; static void spawn_console(void) { if (spawnpid) if(kill_proc(spawnpid, spawnsig, 1)) spawnpid = 0; } static void SAK(void) { do_SAK(tty); #if 0 /* * Need to fix SAK handling to fix up RAW/MEDIUM_RAW and * vt_cons modes before we can enable RAW/MEDIUM_RAW SAK * handling. * * We should do this some day --- the whole point of a secure * attention key is that it should be guaranteed to always * work. */ reset_vc(fg_console); do_unblank_screen(); /* not in interrupt routine? */ #endif } static void do_ignore(unsigned char value, char up_flag) { } static void do_null() { compute_shiftstate(); } static void do_spec(unsigned char value, char up_flag) { if (up_flag) return; if (value >= SIZE(spec_fn_table)) return; spec_fn_table[value](); } static void do_lowercase(unsigned char value, char up_flag) { printk("keyboard.c: do_lowercase was called - impossible\n"); } static void do_self(unsigned char value, char up_flag) { if (up_flag) return; /* no action, if this is a key release */ if (diacr) value = handle_diacr(value); if (dead_key_next) { dead_key_next = 0; diacr = value; return; } put_queue(value); } #define A_GRAVE '`' #define A_ACUTE '\'' #define A_CFLEX '^' #define A_TILDE '~' #define A_DIAER '"' static unsigned char ret_diacr[] = {A_GRAVE, A_ACUTE, A_CFLEX, A_TILDE, A_DIAER }; /* If a dead key pressed twice, output a character corresponding to it, */ /* otherwise just remember the dead key. */ static void do_dead(unsigned char value, char up_flag) { if (up_flag) return; value = ret_diacr[value]; if (diacr == value) { /* pressed twice */ diacr = 0; put_queue(value); return; } diacr = value; } /* If space is pressed, return the character corresponding the pending */ /* dead key, otherwise try to combine the two. */ unsigned char handle_diacr(unsigned char ch) { int d = diacr; int i; diacr = 0; if (ch == ' ') return d; for (i = 0; i < accent_table_size; i++) { if (accent_table[i].diacr == d && accent_table[i].base == ch) return accent_table[i].result; } put_queue(d); return ch; } static void do_cons(unsigned char value, char up_flag) { if (up_flag) return; want_console = value; } static void do_fn(unsigned char value, char up_flag) { if (up_flag) return; if (value < SIZE(func_table)) { if (func_table[value]) puts_queue(func_table[value]); } else printk("do_fn called with value=%d\n", value); } static void do_pad(unsigned char value, char up_flag) { static char *pad_chars = "0123456789+-*/\015,.?"; static char *app_map = "pqrstuvwxylSRQMnn?"; if (up_flag) return; /* no action, if this is a key release */ /* kludge... shift forces cursor/number keys */ if (vc_kbd_mode(kbd,VC_APPLIC) && !k_down[KG_SHIFT]) { applkey(app_map[value], 1); return; } if (!vc_kbd_led(kbd,VC_NUMLOCK)) switch (value) { case KVAL(K_PCOMMA): case KVAL(K_PDOT): do_fn(KVAL(K_REMOVE), 0); return; case KVAL(K_P0): do_fn(KVAL(K_INSERT), 0); return; case KVAL(K_P1): do_fn(KVAL(K_SELECT), 0); return; case KVAL(K_P2): do_cur(KVAL(K_DOWN), 0); return; case KVAL(K_P3): do_fn(KVAL(K_PGDN), 0); return; case KVAL(K_P4): do_cur(KVAL(K_LEFT), 0); return; case KVAL(K_P6): do_cur(KVAL(K_RIGHT), 0); return; case KVAL(K_P7): do_fn(KVAL(K_FIND), 0); return; case KVAL(K_P8): do_cur(KVAL(K_UP), 0); return; case KVAL(K_P9): do_fn(KVAL(K_PGUP), 0); return; case KVAL(K_P5): applkey('G', vc_kbd_mode(kbd, VC_APPLIC)); return; } put_queue(pad_chars[value]); if (value == KVAL(K_PENTER) && vc_kbd_mode(kbd, VC_CRLF)) put_queue(10); } static void do_cur(unsigned char value, char up_flag) { static char *cur_chars = "BDCA"; if (up_flag) return; applkey(cur_chars[value], vc_kbd_mode(kbd,VC_CKMODE)); } static void do_shift(unsigned char value, char up_flag) { int old_state = shift_state; if (rep) return; /* Mimic typewriter: a CapsShift key acts like Shift but undoes CapsLock */ if (value == KVAL(K_CAPSSHIFT)) { value = KVAL(K_SHIFT); if (!up_flag) clr_vc_kbd_led(kbd, VC_CAPSLOCK); } if (up_flag) { /* handle the case that two shift or control keys are depressed simultaneously */ if (k_down[value]) k_down[value]--; } else k_down[value]++; if (k_down[value]) shift_state |= (1 << value); else shift_state &= ~ (1 << value); /* kludge */ if (up_flag && shift_state != old_state && npadch != -1) { if (kbd->kbdmode == VC_UNICODE) to_utf8(npadch & 0xffff); else put_queue(npadch & 0xff); npadch = -1; } } /* called after returning from RAW mode or when changing consoles - recompute k_down[] and shift_state from key_down[] */ /* maybe called when keymap is undefined, so that shiftkey release is seen */ void compute_shiftstate(void) { int i, j, k, sym, val; shift_state = 0; for(i=0; i < SIZE(k_down); i++) k_down[i] = 0; for(i=0; i < SIZE(key_down); i++) if(key_down[i]) { /* skip this word if not a single bit on */ k = i*BITS_PER_LONG; for(j=0; j 0); return 0; } /* * The leds display either (i) the status of NumLock, CapsLock, ScrollLock, * or (ii) whatever pattern of lights people want to show using KDSETLED, * or (iii) specified bits of specified words in kernel memory. */ static unsigned char ledstate = 0xff; /* undefined */ static unsigned char ledioctl; unsigned char getledstate(void) { return ledstate; } void setledstate(struct kbd_struct *kbd, unsigned int led) { if (!(led & ~7)) { ledioctl = led; kbd->ledmode = LED_SHOW_IOCTL; } else kbd->ledmode = LED_SHOW_FLAGS; set_leds(); } static struct ledptr { unsigned int *addr; unsigned int mask; unsigned char valid:1; } ledptrs[3]; void register_leds(int console, unsigned int led, unsigned int *addr, unsigned int mask) { struct kbd_struct *kbd = kbd_table + console; if (led < 3) { ledptrs[led].addr = addr; ledptrs[led].mask = mask; ledptrs[led].valid = 1; kbd->ledmode = LED_SHOW_MEM; } else kbd->ledmode = LED_SHOW_FLAGS; } static inline unsigned char getleds(void){ struct kbd_struct *kbd = kbd_table + fg_console; unsigned char leds; if (kbd->ledmode == LED_SHOW_IOCTL) return ledioctl; leds = kbd->ledflagstate; if (kbd->ledmode == LED_SHOW_MEM) { if (ledptrs[0].valid) { if (*ledptrs[0].addr & ledptrs[0].mask) leds |= 1; else leds &= ~1; } if (ledptrs[1].valid) { if (*ledptrs[1].addr & ledptrs[1].mask) leds |= 2; else leds &= ~2; } if (ledptrs[2].valid) { if (*ledptrs[2].addr & ledptrs[2].mask) leds |= 4; else leds &= ~4; } } return leds; } /* * This routine is the bottom half of the keyboard interrupt * routine, and runs with all interrupts enabled. It does * console changing, led setting and copy_to_cooked, which can * take a reasonably long time. * * Aside from timing (which isn't really that important for * keyboard interrupts as they happen often), using the software * interrupt routines for this thing allows us to easily mask * this when we don't want any of the above to happen. Not yet * used, but this allows for easy and efficient race-condition * prevention later on. */ static void kbd_bh(void * unused) { unsigned char leds = getleds(); if (leds != ledstate) { ledstate = leds; if (!send_data(0xed) || !send_data(leds)) send_data(0xf4); /* re-enable kbd if any errors */ } if (want_console >= 0) { if (want_console != fg_console) { change_console(want_console); /* we only changed when the console had already been allocated - a new console is not created in an interrupt routine */ } want_console = -1; } poke_blanked_console(); cli(); if ((inb_p(0x64) & kbd_read_mask) == 0x01) fake_keyboard_interrupt(); sti(); } unsigned long kbd_init(unsigned long kmem_start) { int i; struct kbd_struct kbd0; extern struct tty_driver console_driver; kbd0.ledflagstate = kbd0.default_ledflagstate = KBD_DEFLEDS; kbd0.ledmode = LED_SHOW_FLAGS; kbd0.lockstate = KBD_DEFLOCK; kbd0.modeflags = KBD_DEFMODE; kbd0.kbdmode = VC_XLATE; for (i = 0 ; i < MAX_NR_CONSOLES ; i++) kbd_table[i] = kbd0; ttytab = console_driver.table; bh_base[KEYBOARD_BH].routine = kbd_bh; request_irq(KEYBOARD_IRQ, keyboard_interrupt, 0, "keyboard"); request_region(0x60,1,"kbd"); request_region(0x64,1,"kbd"); #ifdef __alpha__ /* enable keyboard interrupts, PC/AT mode */ kb_wait(); outb(0x60,0x64); /* write PS/2 Mode Register */ kb_wait(); outb(0x41,0x60); /* KCC | EKI */ kb_wait(); if (!send_data(0xf0) || !send_data(0x02)) printk("Scanmode 2 change failed\n"); #endif mark_bh(KEYBOARD_BH); enable_bh(KEYBOARD_BH); return kmem_start; }